Tag: toyota

Dee Zee: Louvered Sport Bar

John Arnaud Leave a comment
Use This Post Clip for Email

If you’re looking to add an aggressive off-road look to the back of your rig, the louvered sport bar from Dee Zee is a smart pick. Made from heavy-duty steel tube, this sport bar is protected by a rust-resistant textured black powdercoat and includes an integrated third brake light with required wiring. You can also easily add an LED light bar or auxiliary lights if you wish (lights not included with this product). Drilling required for installation.

Available for several GM, Ford F-150 and Super Duty, Nissan Titan, Toyota Tundra, and Ram 1500/2500/3500 applications.

Features

  • Heavy-duty steel tubing.
  • Textured black powdercoat to resist rust.
  • Louvered side panels give an aggressive off-road look.
  • Add LED light bar or auxiliary lights (lights not included).
  • Third brake light built in (wiring included).
  • Drilling required for installation.

Dee Zee Louvered Sport Bar

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ReadyLIFT (44-5877): 8” Lift Kit with Bilstein Shocks for ’07-’18 Toyota Tundra

John Arnaud Leave a comment
Use This Post Clip for Email

If you want a BIG lift kit for your Tundra rig, the ReadyLIFT 44-5877 8” complete lift kit with ever-popular Bilstein shocks is the obvious choice. This kit starts with an ultra-strong, laser-cut, CNC-bent, welded and boxed subframe drop assembly that both maintains your suspension geometry and increases ground clearance over 2” more than the competition. Its unique iron knuckles guarantee a precise fit while allowing retention of factory tie rods.

The kit creates 8” of lift thanks to ReadyLIFT’s offset spacer design, which attaches to the factory strut (for a factory ride) without increasing track width. This means your front tires won’t stick out further than your rear tires (like with other kits). Plus, it means you can run your stock wheels and maintain your spare tire if needed.

Wheel note: The 44-5877 system works only with 20” factory wheels (will not work with 18” factory wheels). Aftermarket wheels acceptable.

Features

  • Guaranteed to keep your factory ride and never wear, break, or fail.
  • Guaranteed toughest finish and safest way to lift.
  • Laser-cut, CNC-bent, welded and boxed subframe drop assembly.
  • CNC-machined iron knuckles allow use of the factory tie rods—no cutting or replacing.
  • Precision-crafted offset upper strut extensions and spring compression spacer retain factory track width.
  • Easy-to-install differential drop system keeps the CV and driveline angles near factory for optimum 4WD performance.
  • Includes new Bilstein shocks (rear).
  • New powder-coated sway bar frame mount spacers keep your sway bar working properly.
  • Thick steel skid plate protects your engine and subframe in adverse driving conditions.
  • Powder-coated strut extensions, cast iron rear blocks, and U-bolts will last as long as your Toyota.
  • Rear blocks are designed FOR the Toyota Tundra (not universal blocks!).
  • Made in the USA.
  • Guaranteed for life against manufacturing defects.

ReadyLIFT 8 Inch Lift Kit with Bilsetin Shocks for Tundra 44-5877

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (510-340): MXP Cold Air Intake for Toyota Tundra and Sequoia

John Arnaud Leave a comment
Use This Post Clip for Email

Like all gas-powered engines, your Toyota V8 makes power by burning a mixture of gasoline and oxygen. Oxygen acts as a catalyst for the detonation, so the number of oxygen molecules in the air charge will directly affect performance. Unfortunately, the OE Toyota Tundra and Sequoia intake systems share many of the same inefficiencies. For example, the intake tube has a tapered shape, with irregular, corrugated inner surfaces. And the air box lets in only a small amount of air, then forces it through a thick paper air filter. All of this causes the air to become turbulent, elevating the temperature and lowering the oxygen content.

AIRAID’s 510-340 MXP high-performance intake system is designed to increase cooler engine airflow, so it can make more horsepower and torque without engine modification. The end result of introducing a higher volume of colder air? An estimated increase of 9 HP and 10 ft.-lb. of torque.

Features

  • For some models of Toyota Tundra and Sequoia.
  • Increases horsepower and torque by 9 HP and 10 ft.-lb., respectively.
  • Replaces stock air box, air filter, and intake tubing.
  • Rotational-molded air box keeps intake air isolated from engine heat.
  • Easy to install using common hand tools.
  • Premium high-airflow air filter.
  • Washable and reusable filter media.
  • Warranty: No-Hassle Lifetime.

AIRAID MXP Cold Air Intake for Tundra and Sequoia 510-340

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2016 Total Truck Centers™ Vendor Showcase presents: ReadyLIFT

John Arnaud Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Total Truck Centers™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, Richard Roberts goes over what’s new for 2016.

Want to know more about ReadyLIFT? Click here:
https://totaltruckcenters.com/manufacturer/readylift

 

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (510-309): MXP Air Intake System for ’16-’17 Toyota Tacoma

John Arnaud Leave a comment
Use This Post Clip for Email

The 510-309 MXP air intake kit from AIRAID for 2016–2017 Toyota Tacoma offers an 8 HP boost at 4,900 rpm (results may vary) and includes a washable and reusable tapered conical universal AIRAID air filter; a one-piece, roto-molded air box; high-density polyethylene tube; integrated velocity stack; and four stainless steel clamps.

The filter itself leverages a multilayer cotton gauze and non-woven synthetic media design for superior filtration. The media is reinforced by both an inner and outer layer of wire mesh to prevent deformity or collapse under high airflow.

The tube benefits from advanced computer modeling to maintain proper mass airflow readings and calibration, while the velocity stack promotes airflow. In fact, AIRAID designed 510-309 specifically to address restrictive factory air flow realities.

Features

  • For 2016–2017 Toyota Tacoma.
  • Replaces stock intake tubing, air filter, and air box.
  • Results in horsepower and acceleration gains.
  • High–air flow washable/reusable air filter media.
  • Aluminum lid shields the filter from hot engine bay.
  • Tuned velocity stacks enhance air flow and mass air sensor functionality.
  • No-Hassle Lifetime Warranty.

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Husky Liners: Mud Guard Combos

John Arnaud Leave a comment
Use This Post Clip for Email

Pledging to end “truck mullets” once and for all, Husky Liners has announced Mud Guard Combo packs for Chevy/GMC, Ford, Ram, and Toyota. These packages give your truck rocking flaps in the front and the back—all in one tidy package and with no drilling required.

Husky Liners Mud Guards are made to be a perfect complement for your fenders, including enough width to provide full tread coverage. The durable, all-weather, impact-resistant thermoplastic material is more than a match for the hazards of the road, and is “guaranteed for life.”

Features

  • Applications for Tacoma, F-150/-250/-350, Colorado/Canyon, Ram 1500/2500/3500, and Silverado/Sierra.
  • Includes front and back mud guards.
  • Designed and manufactured in the USA.
  • Husky Liners’ “Guaranteed for life!” pledge.

Husky Liners: Mud Guard Combos

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

CargoGlide: CG1000XL Sliding Truck Bed Tray

John Arnaud 1 Comment
Use This Post Clip for Email

Designed for work, play, and life in general, the CG1000LX Sliding Truck Bed Tray from CargoGlide provides total access to your cargo—without breaking your back or forcing you to jump in and out of the bed. With models available for all major truck brands—including Chevy/GMC, Dodge, Ford, Nissan, and Toyota—the CG1000XL boasts a real plywood deck with a TPO-laminated surface for added strength and durability; a sturdy steel frame; and 4” high, powder-coated extruded aluminum side rails with integrated full perimeter tie-down tracks and adjustable eyebolt tie-downs.

CargoGlide ships the CG1000XL preassembled and rated with a 1,000-lb. capacity. Includes 8” high-side extensions on the first four feet of the rails at the cab end to help you contain even more cargo. Custom sizes available!

  • 1,000-lb. capacity and 100% extension.
  • Steel frame, aluminum side rails, and laminated rubber plywood deck.
  • 20 industrial cam follower needle and ball bearings.
  • Sold preassembled.
  • Full perimeter tie-down tracks and 4 infinitely adjustable eyebolt tie-downs.
  • Includes 8” high-side extensions for enhanced cargo containment.
  • Custom sizes available!
CargoGlide: CG1000XL Sliding Truck Bed Tray
CargoGlide: CG1000XL Sliding Truck Bed Tray

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Hypertech (706001): Interceptor Power Tuning for ’16 Toyota Tundra 5.7L V8 Gas

John Arnaud Leave a comment
Use This Post Clip for Email

The 706001 Interceptor from Hypertech is smart technology that works with today’s generation of complex engine computers, such as the all-new 2016 Toyota Tundra 5.7L V8 gas truck. The Interceptor easily mounts under the hood and plugs into the factory harness to constantly monitor the vehicle’s functions. The Interceptor then automatically recalculates the factory’s computer performance calibrations with legendary Hypertech Power Tuning. This means more horsepower and torque, quicker acceleration, better drivability, and improved MPG. Plus, Hypertech keeps your investment current with software updates.

  • Easily mounts under the hood.
  • Power Tuning technology optimizes calibrations.
  • Enjoy more horsepower and torque.
  • Quicker acceleration, enhanced drivability, and MPG gains.
  • Updatable with new releases and features.
Hypertech (706001): Interceptor Power Tuning for ’16 Toyota Tundra 5.7L V8 Gas
Hypertech (706001): Interceptor Power Tuning for ’16 Toyota Tundra 5.7L V8 Gas

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AVS: Aeroskin II Textured Matte Black Hood Shield

John Arnaud Leave a comment
Use This Post Clip for Email

AVS has released an all-new lineup of hood shields for a variety of vehicles. The Aeroskin II is the latest product that keeps AVS “Ahead of the Curve.” The Aeroskin II is designed to flow with the contours of your vehicle’s hood, providing the ultimate protection from road hazards. Custom-molded and made in the USA, AVS’s Aeroskin II is precision engineered to perfectly fit your vehicle’s hood.

Features:

  • Custom style that protects your vehicle’s hood
  • Made from a impact-resistant TPO material
  • Installs without drilling using 3M automotive-grade adhesive
  • OEM matte black textured finish
  • Backed by a limited lifetime warranty
  • Made in the USA
  • Available for Ford, Chevrolet, GMC, Dodge, and Toyota

 

AVS Aeroskin II 436011
AVS Aeroskin II 436011

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.