Tag: jl

Rancho: Crawler Short-Arm Suspension Systems for 2018 Jeep Wrangler JL

John Arnaud Leave a comment
Use This Post Clip for Email

Available for 2018 Jeep Wrangler JL (Rubicon and non-Rubicon) and allowing precise adjustments while installed on the vehicle, the new crawler short-arm suspension systems from Rancho include corner-specific, progressive-rate coil springs and fully adjustable control arms with D2 bushings to provide the comfort and durability you crave. Also included are new heavy-duty front and rear adjustable track bars with D2 bushings to center the axles. These D2 bushings feature a PTFE design for grease-free operation and reduced wear.

Note: Aftermarket driveshaft required for maximum front axle articulation.

Features

  • For 2018 Jeep Wrangler JL Rubicon (RS66123B; 3.5” lift) and non-Rubicon (RS66125B; 4.5” lift).
  • Corner-specific, tuned, progressive-rate coil springs.
  • On-vehicle adjustable control arms with D2 bushings.
  • Heavy-duty front and rear adjustable track bars with D2 bushings.
  • All brackets fabricated from high-strength, low-alloy steel.
  • Designed with 37” tires and 17” wheels.
  • Installation: bolt-on.

Rancho Crawler Short Arm Suspension Systems for Wrangler JL

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Rugged Ridge (11504.36): RRC Rocker Guard Kit for 2018 Jeep Wrangler JL Unlimited

John Arnaud Leave a comment
Use This Post Clip for Email

This true rock-crawling accessory from Rugged Ridge puts tight protection right up under the side of your 2018 Jeep JL Unlimited—with an additional special side hoop designed to block large outcroppings on the trail. The special no-drill, frame-mounted design provides a secure, bounce-free installation while keeping the mounting points above the bottom of the frame for greater ground clearance.

Features

  • For 2018 Jeep Wrangler JL Unlimited.
  • High-and-tight rocker panel protection.
  • Side hoops prevent body contact with outcroppings.
  • Installation: +1 hours (no-drill, frame-mounted).
  • Warranty: 5-year limited.

Rugged Ridge RRC Rocker Guard Kit for 2018 Jeep JL Unlimited

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Rancho (RS66122BR5): 2” Sport Suspension System for 2018 Jeep Wrangler JL Unlimited Rubicon

John Arnaud Leave a comment
Use This Post Clip for Email

The versatile, purposeful 2” sport suspension system for 2018 Jeep Wrangler JLU Rubicon 4WD is a 100% bolt-on system that accommodates up to 35” tires. This cutting-edge Rancho product features the company’s new Dynamic Rebound Spring (DRS) technology integrated into the included RS5000X shocks, a unique internal system that uses a precisely tuned metal spring and fortified interior to provide added control, reduce body roll, and prevent rod overextension inside the shock.

The RS66122BR5 Rancho system includes a pair of front and rear corner-specific progressive rate coil springs, which are tuned to provide superior on-road comfort and off-road performance and maintain a perfectly level stance—even during towing or under heavy loads. Completely compatible with the Jeep Factory Electronic Stability System.

Features

  • For 2018 Jeep Wrangler JL Unlimited Rubicon 4WD.
  • Rancho RS5000X shocks.
  • All-new and exclusive Rancho DRS technology.
  • Corner-specific, heavy-duty progressive rate coil springs (front & rear).
  • Bump stop extensions, front sway bar adapter brackets, rear extended sway bar end links, and e-brake line relocation bracket.
  • High-strength, low-alloy steel brackets.
  • Designed for use with up to 35” tires.
  • Easily bolts on; detailed, full-color installation guide included.
  • Warranty: limited lifetime.

Rancho 2 Inch Sport Suspension System for 2018 Jeep Wrangler JL Unlimited Rubicon 4WD

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

WESTiN Automotive: WJ2 Bumper Promotion for Jeep Wrangler JK and JL

John Arnaud Leave a comment
Use This Post Clip for Email

Via mail-in form. Get a Free LED rock light kit with qualifying front WJ2 bumper purchase, pair of HyperQ LED auxiliary lights with qualifying rear WJ2 bumper purchase, and both with qualifying front and rear WJ2 purchase. Offer good October 2 to December 31. Click image for printable form and complete details!

 

WESTiN WJ2 Bumper Promotion for Jeep Wrangler JK and JL

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Bestop: Sunrider for Hardtop for 2018 Jeep Wrangler JL/JLU

John Arnaud Leave a comment
Use This Post Clip for Email

If the open-air experience of wind and sun is one of the reasons you wanted a Jeep Wrangler JL in the first place, the Sunrider for Hardtop from Bestop provides easy access to those wild elements—from right beneath your hard top!

The Sunrider for Hardtop is the first and only product that provides instant access to an open-air driving experience without leaving the front seat of your JL: just flip it back and enjoy. Available in Black Diamond and Black Twill, Bestop’s patented Sunrider for Hardtop is the all-weather, all-purpose, all-year answer to bulky factory Freedom Panels.

Features

  • For 2018+ Jeep Wrangler JL and JL Unlimited with factory hard top.
  • Installs with no drilling or modifications.
  • All-purpose, all-weather, year-round functionality.
  • Includes preinstalled fabric-on-frame assembly, door rails, and instructions.
  • Available in 28 oz. Black Diamond or 30 oz. Black Twill acrylic fabric.
  • Warranty: limited lifetime on Black Twill; 5 years on Black Diamond.

Bestop Sunrider for Hardtop Jeep Wrangler JL

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Go Rhino: Updated Trailline Bumpers for Jeep Wrangler JK and JL

John Arnaud Leave a comment
Use This Post Clip for Email

Available in stubby, straight, and full configurations, the new Trailline bumpers from Go Rhino are better than ever, with a one-piece welded design that fits Jeep Wrangler JL as well as the original JK applications.

Featuring the existing center locking drawer with its standard lock (optional BOLT cylinder with OE key match available), Trailline front bumpers also include a standard winch-mounting platform, winch access panel, light mounts, and a rugged, textured-black powdercoat. The redesigned rear bumpers maintain all their great features (with new part numbers); JL rear bumpers are coming in Q4.

Note: Existing light mount bars for the JK will work on these new JK/JL bumpers and retain their part numbers; however, they have been renamed Trailline 10, 20, and 30.

Features

  • For Jeep Wrangler JK and JL.
  • Retain all the same Trailline features with new JL compatibility.
  • Available in stubby, straight, and full designs.
  • Optional BOLT cylinder for front locking drawer.
  • JL rear bumpers coming in fourth quarter.
  • Two-stage powder-coated and precision laser cut.
  • Warranty: 5-year limited (finish)

Go Rhino Trailline Bumpers for Jeep Wrangler JK and JL

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ARIES (2808509): StyleGuard XD Floor Liners for 2018 Jeep Wrangler JL

John Arnaud Leave a comment
Use This Post Clip for Email

StyleGuard XD floor liners from ARIES aren’t your run-of-the-mill mats. Laser-measured and boasting a multifunctional three-layer construction, these tough-but-sleek StyleGuard XD floor liners give your Jeep Wrangler JL the first-rate interior protection it deserves.

The first layer—the base layer—is covered with OmniGrip fibers: wire-like threads that lock the liners in place on virtually any kind of carpet. Unlike plastic “nubs,” these bristles offer literally thousands of anchor points to prevent sliding around.

The second is a generous layer of cross-linked polyethylene foam that provides a comfortable stepping surface, absorbs and reduces engine and road noise, and provides two-way temperature insulation.

The third and top layer is composed of thermoplastic rubber (TPR), which is wear resistant and waterproof. It resists the wear of foot traffic, provides welcome traction, and delivers elevated interior style. Also at the top level are raised edges and smartly engineered channels that contain spills and debris.

To install StyleGuard XD floor liners, just drop them in: they are designed to conform to the shape of your floor. Plus, when it’s time to clean, just hose them off and let them air dry. 2808509 is a complete kit that includes front and rear liners. Other applications available.

Features

  • Durable three-layer construction for ultimate interior protection.
  • Thousands of patented OmniGrip fibers prevent movement on carpet.
  • Channeled surface and raised edges contain liquids and debris.
  • Cross-linked polyethylene foam adds comfort and helps limit road noise.
  • Laser-measured design for perfect, vehicle-specific contour.
  • Flexible, waterproof TPR top layer will not become brittle over time.
  • Lightweight construction for simple, drop-in installation and easy removal.
  • Fire-retardant according to FMVSS 302 testing.
  • Offered in complete kits or individually for the first or second row.
  • Warranty: limited lifetime.

ARIES StyleGuard XD Floor Liners for Colorado and Canyon

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Rancho: Coil Spring Kits for 2018 Jeep Wrangler JL

John Arnaud Leave a comment
Use This Post Clip for Email

With corner-specific progressive-rate coil springs tuned to provide superior on-road comfort and off-road performance, the all-new coil spring kits for 2018 Jeep Wrangler JL from Rancho give your rig a perfectly level stance and ride—even when towing or under heavy loads. Front coil springs provide up to 3.5” of height on your JL Rubicon or up to 4.5” of height on other JL models.

Features

  • For 2018 Jeep Wrangler JL.
  • Up to 4.5” of lift, depending on application.
  • Corner-specific, progressive-rate springs tuned just for the JL.
  • Superior on- and off-road comfort and performance.
  • Designed to allow for larger wheel/tire combinations without body/fender modification.

Rancho Coil Spring Kit for Jeep Wrangler JL

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ARIES (1053): Grille Guard for Jeep Wrangler JL

John Arnaud Leave a comment
Use This Post Clip for Email

ARIES grille guards take your custom Jeep Wrangler JL to the next level, whether you’re challenging the off-road trail, lighting up the town, or just getting the job done. ARIES grille guards offer an aggressive aftermarket look, extra front-end protection, and plenty of customization opportunities—along with two finish options, a vehicle-specific design, and a no-drill installation.

The wraparound brush guard, wire headlight cages, horizontal crossbars, and rubber-coated vertical risers all work together to not only enhance front-end protection but also to promote an aggressive, customized feel. 1-1/2” heavy-wall tubes are welded together to the vertical risers, creating a one-piece frame for maximum strength and rigidity. The 1053 grille enjoys a smooth black powdercoat, but a polished stainless steel version is also available.

ARIES has also made it easy for you to make these grille guards your own. A customizable center crossbar lets you add LED lights, while the wire headlight cages protect headlights from brush and debris. The cages can be removed if you want a sleeker aftermarket look.

These vehicle-specific grille guards are built just for your new Wrangler JL and come with mounting brackets that bolt on to your rig’s frame using existing mounting points.

Note: Grille guard may interfere with forward-facing cameras/sensors.

Features

  • One-piece, 1.5” diameter, heavy-wall tubing in high-strength carbon steel.
  • Durable semi-gloss black powdercoat.
  • Two predrilled holes in the crossbar for mounting LED light bars or work lights (lights not included).
  • Removable headlight cages for extra protection and a customizable look.
  • Vertical rubber stripping along the risers help maintain a clean finish.
  • Installation: no-drill, vehicle-specific for a custom fit.
  • Warranty: limited lifetime (3-year finish, 1-year parts).

ARIES Grille Guard for Jeep Wrangler JL

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Go Rhino: Dominator Side Steps for Jeep Wrangler JL

John Arnaud Leave a comment
Use This Post Clip for Email

Go Rhino has added three new side steps to its Dominator series, this time for the all-new 2018 Jeep Wrangler JL: Dominator D1 steps, which are full-length, running board–style steps, and Dominator DS and DSS steps, which are rock slider–style steps for rugged off-road adventures. Protecting your JL’s rocker panel from trail obstacles and road debris, these steps go on with no drilling via OEM step and rock rail mount locations, are protected with a black powdercoat, and are backed by Go Rhino’s 5-year limited warranty.

Dominator D1 steps feature a full-length, drop-down step that provides a sturdy, full-length step area for enhanced access—even into lifted rigs with oversized tires.

Both the DS and DSS steps are great for high-clearance use that would still benefit from a step area. DS steps are full-length sliders with outer rub rails and feature a removable steel step. DSS steps take the DS even further, adding removable steel step pads that can be positioned in several locations along the rub rail.

Features

  • For 2018 Jeep Wrangler JL.
  • Protect your rocker panels from off-road hazards.
  • Use OEM step and rock rail mount locations.
  • Finish: black powdercoat.
  • Installation: no drilling.
  • Warranty: 5-year limited.

Go Rhino Dominator DSS Side Steps for Jeep Wrangler Jl

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.