Category: Industry

In the Garage with Total Truck Centers: Scorpion Truck Bed Liner

John Arnaud Leave a comment
Use This Post Clip for Email

Come inside the Total Truck garage as we take you through the installation of some of today’s hottest truck accessories. In this episode, we welcome Dana Mitchell from Scorpion Truck Bed Liners to install a X02 Truck Bed Liner Kit on a 2015 Ram 1500.

Parts used in this video:

Scorpion X02 2 Gallon Truck Bed Liner Kit

Want to check out more about Scorpion? http://totaltruckcenters.com/manufacturer/scorpion

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NSF1 Project Jeep Part 12: Vision X Light Cannons

John Arnaud Leave a comment
Use This Post Clip for Email

NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.

In this video, we take a closer look at the following from Vision X:

Vision X 6.7″ Light Cannon 2 Light Kit (CTL-CPZ610KIT)

Follow the NSF1 project on:

Facebook: https://www.facebook.com/NSF1Jeep
Twitter: https://twitter.com/performancejeep #NSF1

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Go Rhino (28171T): BR20 Rear Bumper Replacement for ’14–’16 Silverado 1500

John Arnaud Leave a comment
Use This Post Clip for Email

Brand new from Go Rhino, the 28171T is the ultimate bumper replacement for 2014–2016 Chevy Silverado 1500s. Compatible with trucks equipped with Rear Park Assist, the BR20 Rear Bumper Replacement features access-friendly steps, heavy-duty D-shackle mounts (not included), factory trailer plug and license plate light provisions, and port access to the spare tire winch.

The BR20 is frame mounted for optimal strength and compatible with the factory receiver hitch; plus, it goes on without any drilling required. Go Rhino protects the 28171T with a zinc phosphate–enhanced textured black powdercoat and backs it with a 5-year warranty.

  • Combination of 3/16” and 1/4” high-grade steel.
  • Laser cut and fully welded one-piece construction.
  • Black textured polyester powdercoat plus zinc phosphate.
  • Integrated steps allow easy access to truck bed.
  • Integrated D-shackle mounts (shackles not included).
  • Provisions for license plate lights and factory trailer plug.
  • Port access to spare tire winch.
  • Compatible with Rear Park Assist and factory receiver hitch.
  • No drilling required.
  • Frame mounted for optimal strength.
Go Rhino (28171T): BR20 Rear Bumper Replacement for ’14–’16 Silverado 1500
Go Rhino (28171T): BR20 Rear Bumper Replacement for ’14–’16 Silverado 1500

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Dee Zee (DZ97909): Tie Downs for ’15–’16 Ford F-150

John Arnaud Leave a comment
Use This Post Clip for Email

Add utility to your truck bed with these aluminum tie downs from Dee Zee. DZ97909 are designed for and rated to the 2015–2016 Ford F-150’s maximum bed strength. Sold in pairs and protected by a black powdercoat, these tie downs go on with no drilling, with all mounting hardware and gaskets included. Dee Zee tie downs are a quick and easy way to add cargo-securing anchor points!

  • Tie-down anchors for cargo.
  • Cast aluminum construction.
  • Black powder-coated finish.
  • Sold in pairs.
Dee Zee (DZ97909): Tie Downs for ’15–’16 Ford F-150
Dee Zee (DZ97909): Tie Downs for ’15–’16 Ford F-150

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Putco (91009-60): SwitchBlade LED Tailgate Light Bar

John Arnaud Leave a comment
Use This Post Clip for Email

Boasting high-power chip-on-board LEDs, the SwitchBlade LED Tailgate Bar from Putco offers brilliant, versatile light output in red, amber, and white. With a universal design created to fit full-size pickups, the 91009-60 features a tinted polycarbonate housing and a IP69K rating, meaning it’s fully sealed and weatherproof.

In addition to the obvious features—including running light, brake light, reverse light, and turn signal functionality, the Putco engineering team included some practical touches, such as a four-prong wiring harness for easy trailer hitch hookups and patented attachment clips for quick access to the spare tire release.

 

  • High-power COB LEDs.
  • Capable of red, amber, and white light output.
  • Operates with running lights, brake lights, reverse light, and turn signals.
  • Fits all full-size trucks.
  • Fully encapsulated in tinted polycarbonate housing.
  • Sealed against water and weather.
  • 4-prong wiring harness for receiver hitch hookups.
  • Removes easily for access to spare tire release.
Putco (91009-60): SwitchBlade LED Tailgate Light Bar
Putco (91009-60): SwitchBlade LED Tailgate Light Bar

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Bestop-Sunrider-for-Hardtop-Animated

Bestop: Sunrider for Hardtop for ’07–’16 Jeep Wrangler

John Arnaud Leave a comment
Use This Post Clip for Email

Summer can’t get here soon enough! The Sunrider® for Hardtop from Bestop lets in sun and air as an all-purpose, all-weather, all-season replacement for bulky factory Freedom Panels—without ever requiring you to leave the front seat of your Jeep.

Bestop-Sunrider-for-Hardtop-Animated
Bestop-Sunrider-for-Hardtop-Animated

Made for 2- and 4-door JKs, Sunrider for Hardtop employs a unique frame design that you can fold back for open-air driving or pull forward and latch to your windshield header like original panels—from inside the cab. This first-of-its-kind product goes on quick and easy (30 minutes or less), with no drilling required, and is available in black twill (52450-17) or black diamond sailcloth (52450-35).

The Sunrider for Hardtop is the reason you said “yes” to driving a Jeep in the first place. Coming from Bestop this spring!

  • Fits ’07–’16 Jeep Wranglers, 2 and 4 door.
  • Folds up or down for on-the-spot changes.
  • Goes on with no drilling in half an hour or less.
  • Available in black twill and black diamond sailcloth.
Bestop: Sunrider for Hardtop Outside
Bestop: Sunrider for Hardtop Outside
Bestop: Sunrider for Hardtop Inside
Bestop: Sunrider for Hardtop Inside

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Westin Automotive (32-31025T): Contour Bull Bar for ’15–’16 Ford F-150

John Arnaud Leave a comment
Use This Post Clip for Email

The Contour 3.5” Bull Bar from Westin creates a seamless front profile for your 2015 or 2016 Ford F-150. Coming in one-fifth larger than a traditional bull bar, this product includes four holes that allow you to install various light combinations, from single-post lights all the way to 30” LED light bars. The 32-31025T is the textured black powder-coated version of the Contour Bull Bar; it also comes in semi-gloss black and stainless steel. Bolts on with no drilling necessary and backed by a 3-year warranty.

Westin light-mounting brackets, license plate relocator, and curved/straight LED light bars sold separately.

  • 5” diameter tubing.
  • Contoured to your truck’s front end.
  • Multifacted molded brushings with exposed fasteners.
  • Predrilled light holes.
  • No-drill installation; mount kit included.
  • Warrantied for three years.
Westin Automotive (32-31025T): Contour Bull Bar for ’15–’16 Ford F-150
Westin Automotive (32-31025T): Contour Bull Bar for ’15–’16 Ford F-150

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

WARN Industries (910500): Drill-Powered Portable Winch

John Arnaud Leave a comment
Use This Post Clip for Email

Turn a handheld power drill into a portable, versatile pulling tool with the Drill-Powered Portable Winch from WARN! The 910500 is an easy-to-use solution for on-the-move pulling jobs thanks to its surprising 500-lb. capacity. Powered by a standard portable drill (not included), this product features a free-spool clutch, 30’ of wire rope, integrated hawse fairlead, and front and rear rigging hooks.

  • Lightweight and portable.
  • Powered by standard portable drill (not included).
  • 500-lb. capacity.
  • Free-spool clutch, integrated hawse fairlead, and rigging hooks (front and rear)
  • Includes 30 feet of wire rope.
WARN Industries (910500): Drill-Powered Portable Winch
WARN Industries (910500): Drill-Powered Portable Winch

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Bushwacker (40969-02): Pocket Style Fender Flares – Matte Black for ’15–’16 Colorado

John Arnaud Leave a comment
Use This Post Clip for Email

With their recessed stainless steel bolts and massive presence, these Pocket Style Fender Flares from Bushwacker are custom-designed to complement your Chevy Colorado’s oversized tires and high-clearance lift kit. Plus, they mount right out of the box!

Bushwacker didn’t ignore form for function, either: UV protection means the matte black finish won’t fade or chalk, and you can paint them to accent your pickup’s body color or match the factory profile.

Pocket Style Fender Flares are made in America from thick, warp-resistant Dura-Flex 2000 material, and they go on easily with no drilling required. When you need maximum tire coverage with minimal time and effort, it’s in the pocket!

  • Adds up to 1.5” of tire coverage.
  • Installs easily with no drilling.
  • OEM matte black finish is easy to paint.
  • 100% UV-protected Dura-Flex 2000—no chalking!
  • Compatible with rear aftermarket bumpers.
  • Made in the USA.
  • Limited lifetime warranty.
  • 100% bolt-on system!
Bushwacker (40969-02): Pocket Style Fender Flares – Matte Black for ’15–’16 Colorado
Bushwacker (40969-02): Pocket Style Fender Flares – Matte Black for ’15–’16 Colorado

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Dee Zee (DZ 31966B): Black Tread Wrap Side Bed Caps for 09-16 Ram 6.5’ Bed

John Arnaud Leave a comment
Use This Post Clip for Email

Made from heavy-gauge Brite-Tread aluminum, Dee Zee’s Side Bed Caps in black tread wrap protect the top edge of your pickup bed. Protected by a glossy black powdercoat that prevents oxidation and maintains good looks over time, the DZ 31966B custom wraps the rear corners of your bed to guard against the hazards of work and play. Available with or without stake-pocket holes punched out for your 2009–2016 Ram with 6.5-foot bed.

  • Nonrusting diamond plate aluminum.
  • Protective glossy-black powder-coated finish.
  • Contour to the edges of your truck bed.
  • Sold in pairs.
  • Available with or without stake bed holes.
  • Made in America.
  • Backed by Dee Zee’s limited lifetime warranty.
Dee Zee (DZ 31966B): Black Tread Wrap Side Bed Caps for 09-16 Ram 6.5’ Bed
Dee Zee (DZ 31966B): Black Tread Wrap Side Bed Caps for 09-16 Ram 6.5’ Bed

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.