Author: John Arnaud

Go Rhino (24295T): BR5 Front Bumper Replacement for Ford F-150

John Arnaud Leave a comment
Use This Post Clip for Email

Go Rhino’s BR5 Front Bumper Replacement for the 2015-2016 Ford F-150 features a welded-steel, two-piece design (bumper shell and mounting plate/winch tray) for use with winches up to 12,500 pounds. This product includes integrated light ports and heavy-duty D-shackle mounts that fit directly to the frame rails for extra strength. The BR5 features a durable black, textured, powder-coated finish and is backed by a 5-year warranty.

Features:

  • BR5 Bumper Shell, Brackets, and Mounting Plate/Winch Tray ship together as one part number.
  • 1-inch steel D-shackle mounting clevis welded directly to the mounting plate/winch tray (shackles not included).
  • Optional light bar provides extra protection and multiple light mounting options.
  • Framed mesh vent cover hides mounting bracket while allowing critical airflow to vehicle.
  • Functional, removable steel mesh covers add protected airflow to the winch.
  • Flush mount light ports.
  • Optional 3″x 3″ light mounts (sold separately).
  • No drilling required.
  • Frame mounted for optimal strength.
  • Will fit 2- and 4-wheel-drive models.
  • Will fit EcoBoost models.
  • Excludes models with Active Park Assist and Adaptive Cruise Control.

    Go Rhino 24295T
    Go Rhino 24295T

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Rugged Ridge (12496.02): 10-Piece Black Euro Guard Light Kit for 07-16 Jeep Wrangler JK

John Arnaud Leave a comment
Use This Post Clip for Email

Protect those expensive lights from impact with this 10-piece Rugged Ridge Euro Guard black metal kit. These guards look as good as they perform. Each black powder-coated metal guard easily installs to factory mounting points, providing a great look and protection from low-hanging trail obstacles. Each kit includes guards for headlights, parking lights, side marker lights, factory fog lights, and rear tail lights. This kit will fit both 2- and 4-door 07-16 Jeep Wrangler models with factory installed bumper-mounted fog lamps.

*Will NOT fit Sahara and Moab editions.

Rugged Ridge 12496.02
Rugged Ridge 12496.02

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AVS: Aeroskin II Textured Matte Black Hood Shield

John Arnaud Leave a comment
Use This Post Clip for Email

AVS has released an all-new lineup of hood shields for a variety of vehicles. The Aeroskin II is the latest product that keeps AVS “Ahead of the Curve.” The Aeroskin II is designed to flow with the contours of your vehicle’s hood, providing the ultimate protection from road hazards. Custom-molded and made in the USA, AVS’s Aeroskin II is precision engineered to perfectly fit your vehicle’s hood.

Features:

  • Custom style that protects your vehicle’s hood
  • Made from a impact-resistant TPO material
  • Installs without drilling using 3M automotive-grade adhesive
  • OEM matte black textured finish
  • Backed by a limited lifetime warranty
  • Made in the USA
  • Available for Ford, Chevrolet, GMC, Dodge, and Toyota

 

AVS Aeroskin II 436011
AVS Aeroskin II 436011

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Superchips: Flashpaq F5

John Arnaud Leave a comment
Use This Post Clip for Email

The all-new Flashpaq F5 performance tuner from Superchips uses an updated, easy-to-use graphic interface; a high-resolution color screen; scan features; and tuning levels to achieve more power per dollar than any other tuner on the market. Available for Ford (PN 1845), Chevy/GMC (PN 2845), Dodge/Ram/Chrysler (PN 3845), California Edition (PN 4845), and Jeep (1998-2014 JK: PN 3874 & 2015 JK: PN 3876).

Features:

  • High-definition, 2.8″ color screen
  • Redesigned graphic interface for improved user experience
  • Increased memory with faster processor for improved tuning and updating
  • Performance tuning for Economy, Towing, Daily Driving, and Extreme Tuning
  • Eliminates downshifting when climbing hills
  • Speedometer correction for changes in tire size and gear ratio
  • Adjusts speed and rev limiters
  • Tuning for shift points, shift firmness, and TQ management
  • Internet updatable with all-new software via USB
  • Active fuel-management control
  • Vehicle parameter-monitoring capabilities
  • Reads and clears diagnostic trouble codes
  • Compatible with other performance upgrades
  • 2-year powertrain warranty
    Superchips FlashpaqF5
    Superchips Flashpaq F5

    Superchips Flashpaq F5 Jeep
    Superchips Flashpaq F5 – Jeep

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-2583): FIPK for 2011-2014 Ford F-150 3.5L EcoBoost

John Arnaud Leave a comment
Use This Post Clip for Email

K&N’s 57-2583 50-state, street-legal air intake system for 2011-2014 Ford F-150 3.5L EcoBoost pickups provides guaranteed increases in horsepower and torque. It features a roto-molded, high-density polyethylene (HDPE) air intake tube attached to a large, reusable, high-flow K&N air filter and an application-specific heat shield to deflect engine heat away from the air inlet. The HDPE air intake tube allows for increased flexibility in design and manufacturing as well as the large power gains.

K&N 57-2583
K&N 57-2583

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Putco: DayLiner SwitchBack LED Accent Lighting

John Arnaud Leave a comment
Use This Post Clip for Email

Putco’s SwitchBack LED DayLiners feature high-power COB (chip on board) LEDs embedded into CNC-trimmed aluminum for an attractive accent day or night. Plus, they features Putco’s new channel light style!

Using your vehicle’s daytime running light and turn signal switches, SwitchBack DayLiners are application specific and affix to your headlamps via preapplied 3M automotive tape.

Each kit includes 5′ of wire and scotch lock clips for easy wiring into your daytime running lamps or low-beam light assembly.

Made in the USA and also available in black.

PUTCO 290150T
PUTCO 290150T

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NSF1 Project Jeep Part 9: Rightline Gear

John Arnaud Leave a comment
Use This Post Clip for Email

NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.

In this video, we take a closer look at the following from Rightline Gear:

Jeep Storage Bag (100J72)

Roll Bar Storage Bag (100J70)

Auto Duffle Bag (100J76)

Follow the NSF1 project on:

Facebook: Facebook.com/NSF1Jeep
Twitter: Twitter.com/PerformanceJeep #NSF1

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NSF1: An Overview and Complete Walkthrough

John Arnaud Leave a comment
Use This Post Clip for Email

NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. In these videos, AAM Group President Tim Odom and NSF1 Project Manager Greg Griffith share the story behind this awesome project Jeep and take you on a tour of the different products they installed.

Follow the NSF1 project on:

Facebook: Facebook.com/NSF1Jeep
Twitter: Twitter.com/PerformanceJeep #NSF1

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.