Tag: rear bumper

WESTiN Automotive: WJ2 Front and Rear Bumpers for ’07-’18 Wrangler JK

John Arnaud Leave a comment
Use This Post Clip for Email

Designed to give your 2007–2018 Jeep JK maximum style and utility, the new WJ2 bumper line from WESTiN Automotive is manufactured from heavy-duty 3/16” plate steel. Up front is the Stubby Front Bumper (59-80005), which features an LED light bar mount able to accommodate a 20” single-row light bar (sold separately) and a winch mounting area (winch sold separately) that allows for maximum radiator air flow. Optional skid plate (59-80005-SP) conceals and protects your electronic sway bar disconnect motor.

In the back, the WJ2 Rear Bumper (59-82005) offers two off-road mount points and is designed to work with either factory or WESTiN hitches. It includes mount points for recovery shackles, auxiliary lights, and rock lights. Both bumpers are protected by a textured black finish and backed by a three-year warranty.

Features

  • For 2007–2018 Jeep Wrangler JK.
  • 3/16-inch plate steel construction.
  • Auxiliary light and jack mount points.
  • Just bolt on: no drilling required.
  • Both products include bumper, mounting hardware, and installation instructions.
  • Finish: textured black.
  • Warranty: 3 years.

WESTiN Automotive WJ2 Front and Rear Bumpers

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

WESTiN: Outlaw Front and Rear Bumpers

John Arnaud Leave a comment
Use This Post Clip for Email

Made from 14-gauge steel and including skid plates, hitches, and auxiliary lights, Outlaw front and rear bumpers from WESTiN give your truck the style, durability, and functionality you’re craving. Outlaw front bumpers offer a 2” diameter tube frame, 1.5” diameter center tubes, and integrated bolt-on LED light mounts for up to two single-row or one double-row 30” light bar. Rear bumpers boast a retractable license plate holder that conceals the receiver hitch and includes mounting points for optional backlighting. Mount kit included. Available in a textured black finish.

Features

  • 14-gauge steel tubing in a textured black finish.
  • Integrated, bolt-on LED light mounts.
  • Retractable license plate holder.
  • Mount kit included.

Westin Outlaw Bumpers

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Go Rhino: BR5.5 Front Replacement Bumper

John Arnaud Leave a comment
Use This Post Clip for Email

The winch-ready, heavy-duty BR5.5 front replacement bumper from Go Rhino is laser measured and designed in 3D CAD to fit the contours of your truck. Its two-piece steel design holds winches rated up to 12,500 pounds, with a winch tray and mounting brackets constructed from 1/4” steel.

The BR5.5 includes a hidden, integrated 2″ receiver hitch mount; integrated light ports; optional patented light bar mount; and patented Rhino Horn tow hook and D-ring shackle mounts that are welded directly to the winch tray for extra strength. Not compatible with Driver Alert package.

Features

  • Winch tray accommodates most winches up to 12.5K.
  • Hinged steel mesh winch cover.
  • Front-facing 2” receiver.
  • Patented Rhino Horn tow hook and shackle mount.
  • Optional light plates.
  • Framed mesh vent covers for improved air flow.
  • Textured black powdercoat.
  • Warranty: 5 year limited.

Go Rhino BR5.5 Front Replacement Bumper for Chevy Silverado 1500

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

N-FAB: RB-H Rear Replacement Bumper for 2017 Ford Raptor

John Arnaud Leave a comment
Use This Post Clip for Email

Compatible with your Raptor’s factory hitch, the RB-H from N-FAB is a bolt-on rear-replacement bumper that retains factory back-up sensors, trailer plug mount, and license plate lights. Constructed from 0.095 wall tubing, the made-in-the-USA RB-H is available in textured black with glossy black side panels or glossy black with textured black side panels and is backed by a lifetime warranty on product and a 5-year warranty on finish.

Features

  • For 2017 Ford Raptor.
  • 0.095 wall tubing.
  • Bolts on; no drilling required.
  • Compatible with factory hitch.
  • Retains factory back-up sensors, trailer plug mount, and license plate lights.
  • Available in Textured Black with Glossy side panels or Glossy Black with Textured side panels.
  • Made in the USA.
  • Warranty: lifetime on product; 5 years on finish.

N-FAB RB-H Rear Replacement Bumper for 2017 Ford Raptor

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ZROADZ: LED Lighting Solutions

John Arnaud Leave a comment
Use This Post Clip for Email

ZROADZ offers over 200 brackets and kits for all popular domestic and import late-model trucks and Jeeps—including many patented items not available anywhere else.

ZROADZ roof mount brackets and kits feature patented single-bolt mounting to provide the sturdiest roof mount anywhere, plus the driver-side bracket mounting lug doubles as a wire pass-through into the cab. Never again wonder where you are going to run your light wires: simply feed through the hollow bolt and install the solid rubber boot. No worries about panel nuts coming loose, leaks, whistling weather stripping, or pinched wires!

Have you ever installed a roof-mounted light bar only to have the customer return with noise issues? ZROADZ has solved this issue with its patented noise-cancelling wind diffusers, which can be installed in less than 15 minutes on any light bar to reduce wind noise by more 80%.

Check out ZROADZ full line of innovative mounting solutions at zroadz.com, including a growing selection of OEM LED grille inserts.

Features

  • Forward-, rear-, and side-facing lighting solutions.
  • Available as brackets only or complete kits.
  • Most products install with no drilling required.
  • Use factory bolt holes and install with common hand tools.
  • Structural warranty: limited lifetime.
  • Finish warranty: 3-year limited.

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Total Truck Centers™: ARIES TrailChaser Front and Rear Jeep Bumpers

John Arnaud Leave a comment
Use This Post Clip for Email

Come inside the Total Truck Centers™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we install the TrailChaser Jeep Front and Rear Bumper from ARIES on a 2016 Jeep Wrangler.

Parts used in this video:

TrailChaser Jeep Front Bumper, Option 3 (2082056)

Trailchaser Jeep Rear Bumper (2082038)

Want to check out more about ARIES?
https://totaltruckcenters.com/manufacturer/aries

 

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Steelcraft: Heavy-Duty Elevation Front and Rear Replacement Bumpers

John Arnaud Leave a comment
Use This Post Clip for Email

Steelcraft heavy-duty grille guards and replacement bumpers are best in class when it comes to protection, as the company is the only one in the industry to both dip and e-coat its products. The Elevation bumper line continues that tradition, achieving a lighter weight without sacrificing durability and including a great-looking matte finish. Elevation bumpers will accommodate most 20” double-row LED light bars and let you retain your factory tow hooks, fog lights, and license plate; plus, Steelcraft warranties the Elevation for 2 years—double the terms of many competitors.

Features

  • Phosphate dipped AND e-coated—only one in the industry to have both.
  • Matte-finished flat steel instead of diamond plate.
  • Schedule 40 pipe weighs 80–90 lb. less than other HD bumpers.
  • Retains factory tow hooks, license plate, and fog lights.
  • Allows most 20” DR light bars.
  • Warranty: 2 years.

Steelcraft Elevation HD Replacement Bumper

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

2015 Total Truck Centers Vendor Showcase presents: Iron Cross Automotive

John Arnaud Leave a comment
Use This Post Clip for Email

Welcome to the 2015 Total Truck Centers Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products. In this episode, Iron Cross very own Stan Neal goes over their front and rear bumpers, including their new bumper for Jeep. Be on the look out for more videos from this series over the coming weeks.

Have questions on the products you’ve seen in this video? Contact your local Total Truck Center to find out more: http://totaltruckcenters.com/stores/retailers

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NSF1 Project Jeep Part 5: Aries Automotive Front and Rear Bumpers

John Arnaud Leave a comment
Use This Post Clip for Email

NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.

In this video, we install the following bumpers from Aries Automotive:

Modular Front Jeep Bumper Kit (2071030)

Modular Front Jeep Bumper Center Section (15600-0)

Modular Front Jeep Bumper Side Extensions (15600-1)

Modular Front Jeep Bumper Brush Guards (15600-4)

Modular Rear Jeep Bumper Kit (2071052)

Modular Rear Jeep Bumper Center Section (25600-0)

Modular Rear Jeep Bumper Side Extensions (25600-1)

Follow the NSF1 project on:

Facebook: Facebook.com/NSF1Jeep
Twitter: Twitter.com/PerformanceJeep #NSF1

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.