Category: Industry

Air Lift (57234): LoadLifter™ 5000 Air Suspension Kit for 2019 Ford Ranger 4WD

John Arnaud Leave a comment
Use This Post Clip for Email

Eliminating squat, trailer sway, rough ride, and bottoming out, the 57234 LoadLifter™ 5000 air suspension kit from Air Lift provides up to 5,000 lb of load-leveling capacity for your 2019 Ford Ranger with four-wheel drive. Perfect for applications that need to haul the big stuff, LoadLifter™ 5000 air springs reinforce existing suspensions to boost safety and comfort when hauling massive loads.

Note: Will not fit factory air. Never exceed manufacturer’s recommended gross vehicle weight (GVW) rating.

Features

  • Fits 2019 Ford Ranger 4WD.
  • Provides up to 5,000 lb of load-leveling capacity.
  • Eliminates squat, trailer sway, rough rides, and bottoming out.
  • No-questions-asked money-back guarantee
  • Warranty: lifetime
Air Lift LoadLifter 5000 Air Spring Kit for 2019 Ford Ranger 57234

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

CURT (18112): Aluminum Hitch Cargo Carrier with Ramp

John Arnaud Leave a comment
Use This Post Clip for Email

Boasting a 50” x 30.5” x 4” hitch basket, the new 18112 trailer hitch cargo carrier with ramp from CURT makes it easy to transport bulky items like lawn mowers, snow blowers, mobility scooters, and similar equipment. Unique among cargo carriers with ramps, this product features a double-folding design, with a hinge that allows it to be folded in half vertically—reducing the chance of obstruction and limiting wind drag when folded up for travel.

Three Ergonomic Ramp Positions

  1. Out and down for easy loading
  2. Vertically and in half after cargo is loaded for safe transportation
  3. Completely folded into the carrier when not in use to stay out of the way

Additional Features

  • 500-lb weight rating
  • Fully welded aluminum tubing with carbide black powdercoat
  • Anti-rattle hitch pin allows for tightening of the shank into the hitch receiver.
  • Cargo basket with built-in reflectors and eye bolts for tie-down points
  • Nonskid ridges for enhanced traction when using the ramp
  • Standard folding 2” x 2” shank fits most class 3, 4, and 4 hitches.
  • Assembles and installs easily with eight bolts
  • Designed, engineered, and manufactured in the USA
  • Warranty: limited lifetime

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Total Truck Centers™: UnderCover ArmorFlex

John Arnaud Leave a comment
Use This Post Clip for Email

Come inside the Total Truck Centers™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we install the ArmorFlex from UnderCover on a 2019 Ram 1500.

Parts used in this video:

ArmorFlex (AX32008)

Want to check out more about UnderCover?
https://totaltruckcenters.com/manufacturer/undercover

(For California Residents)
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Race Sport Lighting: Get $10 Back on GEN6 HID Headlight Conversion Kits

John Arnaud Leave a comment
Use This Post Clip for Email

Offer good July 1–September 30. Click image for printable form and complete details!

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Roll-N-Lock: Get a Free Cargo Manager with Purchase of A-, E-, or M-Series Tonneau

John Arnaud Leave a comment
Use This Post Clip for Email

Offer good July 1–September 30. Click image for printable form and complete details!

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Race Sport Lighting: Get $10 Back on GEN3 LED Headlight Conversion Kits

John Arnaud Leave a comment
Use This Post Clip for Email

Offer good July 1–September 30. Click image for printable form and complete details!

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Air Lift: Get up to $150 Back

John Arnaud Leave a comment
Use This Post Clip for Email

Get $75 off any qualifying on-board air compressor system and/or adjustable air spring kit that you purchase from an authorized installer and have them install. Offer good July 1 to December 31, 2019. Click image for printable form and complete details!

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

ReadyLIFT (69-5530): 3” SST Pre-Load Lift Kit for ’05-’19 Toyota Tacoma

John Arnaud Leave a comment
Use This Post Clip for Email

Answering popular demand, ReadyLIFT is giving its Toyota Tacoma customers even more ways to raise their rides. This pre-load style kit provides 3” total lift in front and 2” lift in the rear, leveraging a precision-crafted, CNC-machined billet aluminum spacer that installs between the factory spring and top hat. This design slightly increases front spring rate, reducing nose dive during braking and improving front roll during hard turns at speed. Drivers will enjoy improved factory driving mannerisms and a slightly firmer ride and handling characteristics thanks to the pre-load spacer.

Like ReadyLIFT’s traditional Tacoma lift kits, the 69-5530 pre-load kit includes 1” differential drop spacers/hardware, sway bar drop spacers, and skid plate spacers, plus the company’s legendary OE-style cast-iron rear lift blocks with proper taper and longer U-bolts.

Allows for up to a 285/65-18 tire on an 18×9 wheel with +18 mm offset (minor trimming may be required).

Features

  • For 2005–2019 MY Toyota Tacoma (6-lug, 2/4WD).
  • Increases ground clearance while allowing for larger off-road wheels and tires.
  • Allows for up to a 285/65-18 tire on an 18×9 wheel with +18 mm offset.
  • Pre-load lift engineering maintains factory alignment geometry.
  • Increases front spring rate for better nose dive control during braking.
  • Installation: bolt-on—no permanent modifications required.
  • Made in the USA.
ReadyLIFT 3 Inch SST Pre-Load Lift Kit for Toyota Tacoma 69-5530

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Rugged Ridge (11540.61): HD X-Striker Bumper Accessory for Jeep Wrangler JK and JL

John Arnaud Leave a comment
Use This Post Clip for Email

Shift your HD bumper into full-on trail-attack mode with the Rugged Ridge HD X-Striker. This bumper add-on easily bolts on to any HD stubby or full-width front bumper to instantly provide a daring new look. The HD X-Striker features sturdy tubular steel construction, with fully welded seams, concealed hardware, and a stunning satin-black powdercoat.

Features

  • For 2007–2018 Jeep Wrangler JK and 2018–2019 Jeep Wrangler JL.
  • Bolts on to any HD stubby or full-width front bumper.
  • Gives your Jeep a daring, bold look.
  • Tubular steel construction, fully welded seams, and concealed hardware.
  • Gorgeous satin-black powdercoat.
  • Installation time: 3+ hours.
  • Warranty: 5-year limited.
Rugged Ridge HD Striker for JK and JL

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Putco: VentureTEC Rack

John Arnaud Leave a comment
Use This Post Clip for Email

The VentureTEC overland modular cargo system (bed rack) from Putco is a sleek way to add endless mounting options to your truck using the company’s patent-pending TEC channel system. Built from lightweight 6061 T6 aluminum, the VentureTEC has options for applications with or without stake pockets and allows uninterrupted use of modern tonneau covers.

Protected by a Putco’s limited lifetime warranty against material defects and failure.

Features

  • Different sizes to accommodate the breadth of truck options on the market.
  • Works with all modern truck bed covers.
  • Lightweight and strong 6061 T6 aluminum construction.
  • Putco-exclusive, patent-pending extrusion tube.
  • Pass-through channel for in-stanchion wire routing.
  • CNC 7-axis bending for exact vehicle cab contour.
  • TEC channels for accessory modifications.
  • No-drill installation into stake pockets (non–stake pocket applications available).
  • High-impact black powdercoat.
  • 500 lb tie-down strength.
  • Built to integrate a Putco LED Work Blade (sold separately).
  • Compatible with all Putco TEC accessories (tie-downs, hand grips, light bars).
  • Designed, engineered, and manufactured in the USA.
  • Warranty: limited lifetime (material defects and failure).
Putco VentureTEC Rack

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.