Go Rhino (63450568T): RB10 Running Boards for 2007-2016 Jeep Wrangler Unlimited

John Arnaud Leave a comment
Use This Post Clip for Email

Go Rhino‘s 63450568T RB10 Running Boards for the 2007-2016 Jeep Wrangler Unlimited protect your paint from flying stones and gravel while providing a wide, full-length step platform for easy entry to the front or back doors. These Raptor-style running boards are built from 16-gauge zinc coated steel and sprayed with a durable black textured finish for corrosion, impact, and abrasion resistance.

Also, NEW bolt-on 4″ drop steps (PN: 63410000T) are now available for the RB10 series!

  • Raptor-style running board design
  • Durable textured-black protective coating for corrosion, impact, and abrasion resistance
  • Protects rocker panel and lower door area from flying rocks and mud
  • Mounting brackets included
  • Simple, no-drill installation

    Go Rhino 63450568T
    Go Rhino 63450568T

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-9036): CARB-Friendly Air Intake System for 2014-2015 Toyota Tundra 4.6L and 5.7L

John Arnaud Leave a comment
Use This Post Clip for Email

The K&N 57-9036 performance air intake system is a little different from the average K&N cold air intake system. K&N engineers chose to retain the use of the 2014-2015 Toyota Tundra 4.6L or 5.7L V8 stock air filter box when designing this system. This decision increases performance while leaving all the stock emissions control equipment in place, allowing the 57-9036 to achieve an exemption order (EO) from the California Air Resources Board (CARB) for the 2014-2015 Toyota Tundra models listed below.

2015 TOYOTA TUNDRA 5.7L V8 F/I – All CARB EO Number: D-269-52
2015 TOYOTA TUNDRA 4.6L V8 F/I – All CARB EO Number: D-269-52
2014 TOYOTA TUNDRA 5.7L V8 F/I – All CARB EO Number: D-269-52
2014 TOYOTA TUNDRA 4.6L V8 F/I – All CARB EO Number: D-269-52

K&N 57-9036
K&N 57-9036

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NSF1 Project Jeep Part 10: Edelbrock E-Force Supercharger for Jeep

John Arnaud Leave a comment
Use This Post Clip for Email

NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.

In this video, we take a closer look at the following from Edelbrock:

E-Force Supercharger System Stage 1 (1527)

Follow the NSF1 project on:

Facebook: Facebook.com/NSF1Jeep
Twitter: Twitter.com/PerformanceJeep #NSF1

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Putco: GM-Licensed Bowtie Emblems

John Arnaud Leave a comment
Use This Post Clip for Email

Putco now has GM-licensed bowtie emblems available in black, chrome, and gunmetal for most 2007-2016 trucks and the 2010-2014 Camaro.

  • Made of solid 304 stainless steel.
  • Replaces existing OEM emblems.
  • Each kit includes front and rear emblems unless otherwise noted.
  • Stainless steel hardware and 3M™ automotive tape included.
  • Backed by Putco’s Lifetime NeveRust Warranty.

    Putco GM Emblem Kits
    Putco GM Emblem Kits

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-3077): 2011-2014 Chevrolet and GMC Duramax

John Arnaud 1 Comment
Use This Post Clip for Email

The K&N 57-3077 FIPK air intake system replaces the restrictive factory air filter and air intake housing in specific Chevrolet Silverado 2500/3500 HD and GMC Sierra 2500/3500 HD models with a turbo V8. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air with less effort than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a black rubber-topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s turbo inlet for a guaranteed power gain. The tube accommodates the factory mass air sensor and air filter minder. The oversized cone-shaped air filter can be used for up to 100,000 miles before servicing is needed, depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, a ratchet set, and an Allen wrench.

K&N 57-3077
K&N 57-3077

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

UnderCover: Flex Now Available for 2016 Toyota Tacoma

John Arnaud Leave a comment
Use This Post Clip for Email

The UnderCover Flex is now available for the all-new 2016 Toyota Tacoma, with models for both the 5′ bed (FX41014) and the 6′ bed (FX41015). The UnderCover Flex is a hard folding tonneau cover that gives you ultimate control of your truck bed with three secure riding positions. The cover is easy to remove, requires no drilling for installation, and mounts flush with your truck’s bed rails–making it the most water-tight hard folding cover on the market. Each panel is made from quality FRP composite material, which is lighter, stronger, and more dent resistant than aluminum. Each Flex has a bed rail mounting system equipped with rubber seals and drain tubes that carry water away from and out of the bed, keeping your gear dry and secure. Best yet, Flex is backed by a 3-year warranty.

Undercover Flex 2016 Toyota
UnderCover Flex 2016 Toyota

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Edge Products (98618): EAS Data-Logging Kit

John Arnaud Leave a comment
Use This Post Clip for Email

The EAS (Expandable Accessory System) allows you to connect and display multiple accessory sensors, daisy-chain style, to customize the CS2/CTS2 to your specific vehicle and needs. Don’t add clunky gauges when you can have the clean look of dozens of display parameters on a single device using Edge’s EAS.

Edge Products’ 98618 EAS Data-Logging Kit is for the ultimate diesel enthusiast! This kit gives users the ability to monitor EGTs in two different locations, two 0-100 PSIg boost sensors, and two -40F to 300F temp sensors for unmatched monitoring.  This kit is designed for truck owners who have upgraded turbos and other mods where the stock sensors just aren’t enough anymore. Truck owners who use trucks for dyno competitions, sled pulls, and drag racing need this kit. Fine tuning these trucks can be difficult, but with the Edge EAS Data-Logging Kit you can log runs, view logs, and make adjustments as needed for maximum performance.

Includes:

  • EAS Starter Kit
  • Two EAS EGT Probes
  • Two EAS Universal 5 Volts
  • Two EAS 0-100 PSIg Pressure Sensors
  • Two EAS -40F to 300F Temperature Sensors

    Edge 98618
    Edge 98618

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

T-Rex Grilles: An American Original

John Arnaud Leave a comment
Use This Post Clip for Email

By John M. Arnaud

Southern California–based T-Rex Grilles might be a relative newcomer to Total Truck Centers, but the company has been pumping out cutting-edge grille designs for nearly two decades. With a variety of series to choose from—X-Metal, Torch LED, Graphic, and Billet, to name a few—T-Rex has a style to fit your aesthetic.

Last week Total Truck Centers had T-Rex National Sales Manager Tom Ameduri in the office to share ideas, swap stories, and build a more effective partnership. Tom learned about all the programs we’ve put together to support local jobbers, and we discovered a few things as well. Like when T-Rex says its products are made in America, they really mean it: everything, from materials and labor to manufacturing and shipping boxes, originates domestically. The company is also ramping up production with a faster, more efficient laser cutter.

We love having these meetings because they give us the chance to connect people with people, from warehouse distributors and manufacturers to all of us here at headquarters and our nationwide network of aftermarket jobbers. Thanks for coming out to see us, Tom: without the support of manufacturers like T-Rex, our program wouldn’t be possible!

T-Rex Grilles Visits Total Truck Centers
T-Rex Grilles Visits Total Truck Centers

To give your truck a front end to envy, head on over to your local Total Truck Centers retailer and ask about a T-Rex grille. Find an affiliated store using our dealer locator.

If you are a truck aftermarket retailer or installer interested in joining the nationwide Total Truck Centers network, click here to get started!

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Putting in Work with Putco

John Arnaud Leave a comment
Use This Post Clip for Email

By John M. Arnaud

Known for its broad range of truck and SUV accessories, Putco is a giant in the truck aftermarket industry—and rightly so. From bed rails, grilles, and aesthetic trim to protective finishes and an astonishing selection of premium lighting, Putco has something for just about anyone wanting to set their pickup apart.

That’s why Total Truck Centers was thrilled to have National Sales Manager Scott Majors and Western Regional Sales Manager Desia Anderson in house to talk shop and get a sneak peek at what’s coming down the pike on Putco’s production schedule. (Don’t ask, we can’t tell you…yet!) What we CAN say is that we have Putco down to shoot some In the Garage and AAM University videos next year, so you can look forward to detailed installations as well as some educational series straight from the horse’s mouth.

Many thanks to Scott and Desia for taking the time to come out to see us. Without the support of manufacturers like Putco, our program wouldn’t be possible!

Putco Visits Total Truck Centers
Putco Visits Total Truck Centers

To give your truck a full Putco makeover, head on over to your local Total Truck Centers retailer. Find an affiliated store using our dealer locator.

If you are a truck aftermarket retailer or installer interested in joining the nationwide Total Truck Centers network, click here to get started!

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Total Truck Centers presents: SEMA 2015

John Arnaud Leave a comment
Use This Post Clip for Email

Welcome to the 2015 SEMA Show! In this video series, we will show you the exciting new products that you can expect to see in 2016.

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.