NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.
In this video, we take a closer look at the following from Rancho Suspension:
Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
NSF1 Project Jeep Part 18: Bestop RoughRider Spare Tire Organizer
NSF1 Project Jeep Part 18: Bestop RoughRider Spare Tire Organizer
NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the install...
New from the Westin Automotive design team are seven Snyper LED light mounts for Jeep Wrangler: an Overhead LED Light Hoop, Pillar LED Light Mount, LED Hood Mount, LED Cowl Mount, Lower Pillar Light Mount, Light Bar Bumper Mount, and 30” Light Bar Bumper Mount.
These products share a few common features, including a textured black powdercoat that complements OEM trim and no-drill, bolt-on installation. Where applicable, they also include corrosion-resistant stainless steel fasteners and foam gaskets to protect your vehicle. They boast a textured black finish to help create a cohesive look, and are backed by Westin’s 3-year warranty. Ask about one for your ride!
Features
Overhead LED Light Hoop: Mounts 50” light bar above the windshield and includes auxiliary light mounting points at lower pillar. Steel construction.
Pillar LED Light Mount: Mounts 50” light bar at the upper windshield and post lights at the pillar level. Steel construction.
LED Hood Mount: Mounts 20” light bar without obstructing the driver’s view. Cast aluminum construction.
LED Cowl Mount: Mounts 40” single-row light bar across the cowl area. Set of two. Cast aluminum construction.
Lower Pillar Light Mount: Mounts to existing points at the lower pillar location. Cast aluminum construction.
Light Bar Bumper Mount: Mounts up to three auxiliary post lights on the welded tabs, or one 20” light bar. Steel construction.
30” Light Bar Bumper Mount: Mounts 30” light bar on stock bumper. Steel construction.
Westin Automotive: Snyper LED Light Mounts for Wrangler
Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Westin Automotive: Snyper LED Light Mounts for Wrangler
Westin Automotive: Snyper LED Light Mounts for Wrangler
New from the Westin Automotive design team are seven Snyper LED light mounts for Jeep Wrangler: an Overhead LED Light Hoop, Pillar LED Light Mount, LED Hood Mount, LED Cowl Mount, Lower Pillar Light Mount, Light Bar Bumper Mount, and 30” Light Bar ...
NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.
In this video, we take a closer look at the following from Rancho Suspension:
Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
NSF1 Project Jeep Part 17: Bestop Trektop Pro Hybrid Soft Top
NSF1 Project Jeep Part 17: Bestop Trektop Pro Hybrid Soft Top
NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the install...
NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.
In this video, we take a closer look at the following from Aries Automotive:
Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
NSF1 Project Jeep Part 16: Aries Automotive Tubular Jeep Doors
NSF1 Project Jeep Part 16: Aries Automotive Tubular Jeep Doors
NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the install...
A versatile Jeep deserves versatile accessories. New from Rugged Ridge is the Configurable Cargo Cover (C3) for Jeep Wrangler JK (2007–2016 2D without subwoofer). The patent-pending 13260.03 offers complete protection for the rear cargo area of your Jeep, protecting carpet and plastic trim from damage, scratches, pet claws, dirt, and other debris. This custom-made, functional accessory also creates a resting space for your pet on long trips.
Rugged Ridge (13260.03): C3 Cargo Cover for 2007+ Jeep Wrangler JK
The C3 Cargo Cover is compatible with rear fold and tumble seats, with a water-resistant, flip-out cover flap to keep dirt from falling into the rear tailgate door gap and an integrated front curtain wall to keep items/pets from entering the front seat area. This product’s unique side retention system ensures that the cover stays in place as you load and unload. Easily installed and removed, Rugged Ridge’s C3 Cargo Cover gives you protection when and where you need it.
Features
For Jeep Wrangler JK (2007–2016 2D without subwoofer; 2015–2016 2D with subwoofer).
Protects carpet and plastic trim from damage.
Creates a safe, restful space for pets on long road trips.
Limitable access to front seat area.
Compatible with rear fold and tumble seats.
5-year limited warranty.
Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Rugged Ridge (13260.03): C3 Cargo Cover for 2007+ Jeep Wrangler JK
Rugged Ridge (13260.03): C3 Cargo Cover for 2007+ Jeep Wrangler JK
A versatile Jeep deserves versatile accessories. New from Rugged Ridge is the Configurable Cargo Cover (C3) for Jeep Wrangler JK (2007–2016 2D without subwoofer). The patent-pending 13260.03 offers complete protection for the rear cargo area of yo...
The 63-1573 AirCharger air intake system from K&N replaces the restrictive factory air filter and air intake housing on 2012–2016 Jeep Wranglers (3.6L V6), dramatically increasing usable power and acceleration throughout the engine’s RPM range.
This kit includes a uniquely designed snorkel system that brings in outside air from the top of the windshield, allowing you to tackle extreme off-road conditions. Fresh air is directed through the low-restriction snorkel tubing and into a replacement K&N roto-molded polyethylene air box that contains a chrome-topped K&N high-flow air filter. The aerodynamic tube smooths and straightens the air flow before it goes directly into the engine’s throttle body for a guaranteed power gain.
K&N (63-1573): Snorkel Air Intake System for ’12-’16 Wrangler JK
The oversized, cone-shaped air filter can be used for up to 100,000 miles before servicing is needed (depending on driving conditions). The intake installs in 90 minutes or less using your vehicle’s existing factory mounting points.
Note: Not legal for use or sale in California. Right front fender will need to be removed to install the snorkel (kit can be used without the snorkel); no cutting required.
Features
Designed for 2012+ Jeep Wranglers.
Dyno-estimated horsepower gain: 6.58 @5,200 rpm (results will vary).
Dyno-estimated torque gain: 9.38 ft.-lb. (results will vary).
Rotational molded air box, inlet tube, and snorkel system.
Kit can be used without the snorkel.
Enclosed air box separates fresh air from hot engine compartment.
Removable air box lid provides easy service access to washable/reusable air filter.
Included heat shield protects snorkel system.
Backed by K&N’s 10-year/Million Mile Limited Warranty.
Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
K&N (63-1573): Snorkel Air Intake System for ’12-’16 Wrangler JK
K&N (63-1573): Snorkel Air Intake System for ’12-’16 Wrangler JK
The 63-1573 AirCharger air intake system from K&N replaces the restrictive factory air filter and air intake housing on 2012–2016 Jeep Wranglers (3.6L V6), dramatically increasing usable power and acceleration throughout the engine’s RPM rang...
The RSJ074WD-SR Stealth LED light bar kit from Race Sport provides everything you need for a perfect installation on your Jeep Wrangler, including a vehicle-specific roof-mounting bracket, law-compliant light bar cover, and theft-protection lock nuts to keep your bar safe from prying hands.
The Stealth light bar disappears into your blacked-out ride, but roars to life at night thanks to brilliant single-row Cree LEDs.
Features
250-watt/25,000-lumen light bar with 50,000-hour lifetime.
6,500 K color, with 12–32v compatible range.
Includes mounting bracket, light cover, and theft-deterrent lock nuts.
Backed by a lifetime warranty.
Race Sport (RSJ074WD-SR): Stealth LED Light Bar Kit for 2007+ JK Wrangler
Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Race Sport (RSJ074WD-SR): Stealth LED Light Bar Kit for 2007+ JK Wrangler
Race Sport (RSJ074WD-SR): Stealth LED Light Bar Kit for 2007+ JK Wrangler
The RSJ074WD-SR Stealth LED light bar kit from Race Sport provides everything you need for a perfect installation on your Jeep Wrangler, including a vehicle-specific roof-mounting bracket, law-compliant light bar cover, and theft-protection lock nuts...
NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.
In this video, we take a closer look at the following from Rancho Suspension:
Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
NSF1 Project Jeep Part 15: Rancho 3.5″ Sport Lift Kit & Differential Covers
NSF1 Project Jeep Part 15: Rancho 3.5″ Sport Lift Kit & Differential Covers
NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the install...
The 14015 Cowl Cover is the newest entry in Bushwacker’s Trail Armor series for Jeep Wrangler and Wrangler Unlimited. With its matte black textured finish, this Dura-Flex 2000 TPO cover goes on easily via double-sided automotive-grade 3M tape to prevent the dings and scratches that can come from side mirrors on overextended doors. Painted to match your ride’s color scheme, this product is made in America and backed by a limited lifetime warranty.
Features
Excellent solution for preventing/covering common JK mirror dents.
Can be painted to match.
Installs easily with 3M auto tape.
Constructed from tough Dura-Flex 2000 TPO.
Matte black textured finish.
Made in the USA.
Lifetime limited warranty.
Bushwacker (14015): Cowl Cover for 2007+ Wrangler JK/JKU
Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Bushwacker (14015): Cowl Cover for 2007+ Wrangler JK/JKU
Bushwacker (14015): Cowl Cover for 2007+ Wrangler JK/JKU
The 14015 Cowl Cover is the newest entry in Bushwacker’s Trail Armor series for Jeep Wrangler and Wrangler Unlimited. With its matte black textured finish, this Dura-Flex 2000 TPO cover goes on easily via double-sided automotive-grade 3M tape to pr...
Go Rhino is hitting the Jeep market in a big way, porting its signature BR Series bumper to the Jeep Wrangler platform (JK and JK Unlimited). The product’s six-point mounting system and no-cut, no-drill installation make it the easiest-on Jeep bumper on the market today.
You can customize the feature-rich, winch-ready BRJ40 with three optional end cap styles (Stubby, Straight, and Full) and three optional light mount bars (Trailline, Rockline, and Roadline)—combining to present 16 separate combinations to fit every taste and personality.
Features
Bumper made from 3/16” steel; brackets formed from 1/4” steel.
Stainless steel hardware.
Polymer rub plates protect bumper.
Compatible with factory fog lights.
1” steel shackle mounts with signature Go Rhino horn design.
No cutting or vacuum canister relocation required.
Locking drawer codes to ignition key.
Accommodates up to 12,500-lb. capacity winches.
Textured black powder-coated finish.
5-year warranty.
Go Rhino: BRJ40 Modular Front Bumper for ’07-’16 Wrangler JK
Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.
Go Rhino: BRJ40 Modular Front Bumper for ’07-’16 Wrangler JK
Go Rhino: BRJ40 Modular Front Bumper for ’07-’16 Wrangler JK
Go Rhino is hitting the Jeep market in a big way, porting its signature BR Series bumper to the Jeep Wrangler platform (JK and JK Unlimited). The product’s six-point mounting system and no-cut, no-drill installation make it the easiest-on Jeep bump...
Share This Post!