Bulldog Winch (12001) 1200 LB 12vDC HOIST

Are you using your winch to lift loads in the air? STOP! Winches are designed to pull loads over the ground and using a winch to lift a load in the air is extremely dangerous. That’s why Bulldog Winch has come out with its first Hoist ever!

The 12001 Hoist from Bulldog Winch has a double cone brake in the gearbox and is designed to hold up to 1200 pounds dead lifted through thousands of cycles.

Hoist can be used with a crane arm, lift heavy trailer ramp doors, or many other uses.  It is available in wire rope or high visibility orange synthetic. 

  • Powerful permanent magnet DC motor
  • 3 stage planetary geartrain
  • Power load up and down
  • Automatic load holding brake
  • Heavy duty chassis and gear box
  • Includes 20 ft controller
  • Wire rope or high visibility orange synthetic available

Ready to buy? Need help with the install? To find your nearest Total Truck Centers™ affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Superwinch (1140232): Winch2Go 12-Volt Portable Winch with Synthetic Rope

Packing a synthetic rope instead of steel, this version of the Winch2Go from Superwinch enjoys a lighter weight perfect for its role as a portable recovery solution. Additionally, synthetic rope has no memory for improved rigging performance and is less likely to harm the user in case of failure.

With its 4,000 lb line-pull rating (8,000 lb if using a double-line technique), the 1140232 Winch2Go SR from Superwinch is the product you need anytime you could use a pull, whether you’re at home, at the track, or blazing a new trail. It comes with a lockable, all-in-one tackle box for tidy storage, plus three shackles, two straps, one pulley block (capable of pulling 8,000 lb), 10-foot battery leads, and official Superwinch leather gloves.

Features

  • Portable, lightweight winch with synthetic rope and hawse fairlead
  • All-in-one tactical storage box can be locked
  • Three shackles, two straps, and one pulley block
  • 10’ battery leads and stock prewired quick disconnects
  • Recessed sockets to prevent damage
  • Official Superwinch leather gloves
  • Warranty: 2-year limited
Superwinch Winch2Go Portable Winch with Synthetic Rope 1140232

Ready to buy? Need help with the install? To find your nearest Total Truck Centers™ affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

WARN: VR EVO Winches

With the lowest amp draw and fastest line speed under load, the new VR EVO series of winches represents the hardest-working standard-duty winches in the WARN lineup. VR EVO winches feature IP68-rated waterproof construction for performance in all conditions and a two-in-one wireless/corded remote that gives you options when winching—not to mention that legendary WARN reliability.

VR EVO winches are covered by the industry-leading WARN limited lifetime warranty. Boasting pulling capacities from 3.6K to 5.4K, the series currently includes the following models:

  • VR EVO 12 (103254): 85’ of 3/8” steel rope and roller fairlead
  • VR EVO 12-S (103255): 90’ of 3/8” synthetic rope and black hawse fairlead
  • VR EVO 10 (103252): 90’ of .354” steel rope and roller fairlead
  • VR EVO 10-S (103253): 90’ of 3/8” synthetic rope and black hawse fairlead
  • VR EVO 8 (103250): 90’ of 5/16” steel rope and roller fairlead
  • VR EVO 8-S (103251): 90’ of 3/8” synthetic rope and black hawse fairlead
WARN VR EVO Winch 103254

Ready to buy? Need help with the install? To find your nearest Total Truck Centers™ affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Rugged Ridge: Get $50 Back on Qualifying Winch, Towing, and Recovery Purchases

Offer good August 1–31. Click image for printable form and complete details!

Ready to buy? Need help with the install? To find your nearest Total Truck Centers™ affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

ARIES (2156002): TrailCrusher® Front Bumper for Jeep Wrangler JL and Gladiator

The TrailCrusher® front bumper from ARIES is designed, tested, and built to work hard on the trail and give your Jeep Wrangler JL or Gladiator the functional advantage you need when it comes to winches and shackles. It’s also no accident that its tough look has been completely customized for your trail-ready rig, with angular lines that sit high and tight against the front of your Jeep to ensure plenty of ground clearance.

The 2156002 TrailCrusher® front bumper features a one-piece design with 3/16” thick steel plate, with a winch-and-shackle rating of 12.5K pounds (straight-line pull). Predrilled slotted holes create a universal and secure winch-mounting platform, whild additional predrilled holes accept a hawse or roller fairlead (winches and fairleads not included). An optional stinger brush guard can be installed to both help protect the winch and add an extra-aggressive profile.

ARIES TrailCrusher® front bumpers go on with no drilling and comes with a durable carbide powdercoat atop a durable e-coat to protect from hazards seen and unseen. Rear bumper also available (#2157002). Includes bumper and all necessary hardware.

Features

  • 12,500 lb. winch-and-shackle rating for ultimate off-road functionality.
  • Standard winch mounting platform accepts most types of winches.
  • Welded shackle mounts and 1/4” sleeves provide reliable anchoring points.
  • Shackle mounts accept pins up to 7/8” in diameter (#2166071 recommended).
  • No-drill install uses factory mounting points with no pump relocation required.
  • One-piece construction with 3/16” steel plates for maximum strength.
  • Narrow width and high ground clearance for an improved off-road style.
  • Durable carbide black powdercoat with rust-resistant E-coat finish.
  • Angular brush guard helps protect the winch and adds an aggressive look (sold separately).
  • Center round cutouts accept OE bumper lights.
  • Includes mounting hardware and 3/8” installation brackets.
  • Warranty: limited lifetime (3-year finish, 1-year parts).
ARIES TrailCrusher Front Bumper for Jeep JL_Gladiator 2156002

Ready to buy? Need help with the install? To find your nearest Total Truck Centers™ affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

WARN: Get Up to $100 Back on Winches

Offer good April 1 to May 31. Click image for online redemption form!

WARN $100 Back on Winches

Ready to buy? Need help with the install? To find your nearest Total Truck Centers™ affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Rugged Ridge: Get Up to $50 Back on Qualifying Winch, Towing, and Recovery Purchases

Offer good April 1–30. Click image for printable form and complete details!

Rugged Ridge $500 Back on Winches, Towing, and Recovery

Ready to buy? Need help with the install? To find your nearest Total Truck Centers™ affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Go Rhino (24176T): BR5.5 Replacement Front Bumper for 2019 Chevrolet Silverado

Go Rhino designed its winch-ready BR5.5 replacement bumpers for 2019 Chevrolet Silverado to meet the high standards of Chevy owners who won’t settle for anything less than exceptional fit, function, and style. The rugged design of the 24176T BR5.5 Go Rhino bumper includes a unique hinged winch access cover, hidden 2” hitch receiver, patented tow-hook shackle mounts, and easy-to-install modular construction.

Features

  • For 2019 Chevrolet Silverado 1500.
  • Bumper and winch tray ship together.
  • 4-gauge 1/4” winch tray accommodates most winches up to a 12.5K lb. capacity.
  • Dynamic hinged steel mesh cover allows easy access to the winch.
  • Front-facing 2” hitch receiver with removable steel cover.
  • Framed mesh vent covers let air flow through the bumper.
  • Patented Rhino Horn tow hook and shackle mount; accommodates up to 7/8” D-ring pins.
  • License plate mounting bracket included.
  • Optional light mount bar and light plates available.
  • Finish: textured black powdercoat.
  • Warranty: 5-year limited.
Go Rhino BR5.5 Front Replacement Bumper for 2019 Chevy Silverado 24176T

Ready to buy? Need help with the install? To find your nearest Total Truck Centers™ affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

WARN: Epic Sidewinder Direct-Connect Rigging System

Built from ultra-durable forged aluminum supplemented by forged-steel pins, the Epic Sidewinder direct-connect rigging system from WARN provides the ultimate in secure anchor-point attachment when you need to tackle a challenge head-on. Easy and fast to attach to most bumper recovery points (D-ring shackles, recovery straps, rope extensions & soft shackles), the Epic Sidewinder replaces your winch’s hook and shackle.

Compatible with winches up to 18K lb. (min. 64K lb. break strength).

Available in three finishes: Polished (100640), Black (100770), and Gunmetal (100635).

Features

  • Ultra-durable forged 6061-T6 billet aluminum body and forged-steel screw pin.
  • Corrosion, impact, salt, weather, and UV resistant for lasting good looks.
  • Replaces winch’s hook and shackle to provide a faster, easier, more direct link to recovery point and rigging accessories.
  • Compatible with winches up to 18,000 lb.; minimum 64,000 lb. break strength.
  • Quickly attaches to most bumper recovery points, D-ring shackles, recovery straps, rope extensions, and soft shackles.
  • Directly attaches to bumper D-ring mount tabs with at least 1-3/8” clearance from face to center hole.
  • Optional polyurethane isolator prevents debris from damaging the pin shaft (available in Black or Red).
  • Three finishes: Black, Polished, and Gunmetal.
WARN Epic Sidewinder Direct-Connect Rigging System 100635

Ready to buy? Need help with the install? To find your nearest Total Truck Centers™ affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Steelcraft Stubby Replacement Bumper for Jeep Wrangler JK and JL

Steelcraft: Stubby Replacement Bumper for Jeep Wrangler JK and JL

Steelcraft engineered its new front and rear one-piece Stubby Replacement Bumpers for Jeep Wrangler JL and JK with the off-roading enthusiast in mind, creating a minimal footprint while retaining an inspired and rugged profile with no practical compromises.

The front Stubby Replacement Bumper stands ready to accommodate your winch, 20” LED light bar, and shackle (none included); it also lets you keep your factory fog lights. Its rear counterpart lets you retain use of the factory hitch and accommodates spare tires up to 35” (an optional spare tire carrier allows for larger tire sizes). Steelcraft outfitted both versions with fully welded eyelets, a matte finish, a double E-coat and powdercoat for maximum protection from rust, and a 2-year warranty.

Features

  • One-piece design.
  • E-coated and powder coated.
  • Winch and 20” LED light bar ready (front; not included).
  • Retain factory fog lights (front).
  • Retain factory hitch (rear).
  • Accommodates 35” spare tire (rear).
  • Warranty: 2 years.
Steelcraft Stubby Replacement Bumper for Jeep Wrangler JK and JL

Ready to buy? Need help with the install? To find your nearest Total Truck Centers™ affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers™ Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.