Renegade III: Motive Gear, TEN Factory, POWERTRAX

For the third consecutive year, The AAM Group™ and Total Truck Centers™ are sending a custom build to SEMA. This year is the Renegade III: a 1974 Jeep CJ-5 that we’ve taken to the ground and reconstructed with all of the enhancements we would love to have seen back in in the seventies.

The build was conceived, designed, and managed by AAM Program Sales Manager Greg Griffith, with help from Atomic City 4×4 in Oak Ridge, Tennessee, and Man Cave Designs. It was made possible thanks to the support of our many valued Total Truck Centers™ vendor partners.

In this video, we take a look at the following products from Motive Gear, TEN Factory, and POWERTRAX:

Parts used in this video:

Motive Gear 3.73 Ratio Differential Ring and Pinion for 7.125 in, 10 bolt (D30-373)

Motive Gear Differential Master Bearing Kit, Timken for Dana 30 (R30RMKT)

Motive Gear 3.73 Ratio Differential Ring and Pinion for 8.5 in, 10 bolt (D44-373)

Motive Gear Differential Master Bearing Kit, Timken for Dana 44 (RA28LRMKT)

TEN Factory Performance Complete Front Axle Kit (MG22139)

POWERTRAX Grip PRO Traction System, for Dana 30 (GT443027)

POWERTRAX Grip PRO Traction System, for Dana 44 (GT434430)

(For California Residents)
WARNING: (For California Residents)
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

 

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Renegade III: Edelbrock

For the third consecutive year, The AAM Group™ and Total Truck Centers™ are sending a custom build to SEMA. This year is the Renegade III: a 1974 Jeep CJ-5 that we’ve taken to the ground and reconstructed with all of the enhancements we would love to have seen back in in the seventies.

The build was conceived, designed, and managed by AAM Program Sales Manager Greg Griffith, with help from Atomic City 4×4 in Oak Ridge, Tennessee, and Man Cave Designs. It was made possible thanks to the support of our many valued Total Truck Centers™ vendor partners.

In this video, we take a look at the following products from Edelbrock:

Parts used in this video:

Performer Jeep 4.0L Cylinder Head (50169)

Performer Series 500 CFM Carburetor (1403)

Carburetor Calibration Kit (1486)

 

(For California Residents)
WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.

 

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Renegade III: CURT

For the third consecutive year, The AAM Group™ and Total Truck Centers™ are sending a custom build to SEMA. This year is the Renegade III: a 1974 Jeep CJ-5 that we’ve taken to the ground and reconstructed with all of the enhancements we would love to have seen back in in the seventies.

The build was conceived, designed, and managed by AAM Program Sales Manager Greg Griffith, with help from Atomic City 4×4 in Oak Ridge, Tennessee, and Man Cave Designs. It was made possible thanks to the support of our many valued Total Truck Centers™ vendor partners.

In this video, we take a look at the following products from CURT:

Parts used in this video:

Bumper Hitch Receiver (19050)

Class 3 Ball Mount (45031)

Switch Ball Trailer Ball Set (42178)

Hitch Lock (23502)

 

(For California Residents)
WARNING: This product can expose you to chemicals including lead; which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

 

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Total Truck Centers™: Auto Ventshade Aeroskin II

Come inside the Total Truck Centers™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we install the Aeroskin II from Auto Ventshade on a 2015 Ford F-150.

Parts used in this video:

Aeroskin II (436096)

Want to check out more about Auto Ventshade?
https://totaltruckcenters.com/manufacturer/avs

 

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Renegade III: Flex-A-Lite Flex-a-fit® Aluminum Radiator/Fan Combo and Mojave Heater

For the third consecutive year, The AAM Group™ and Total Truck Centers™ are sending a custom build to SEMA. This year is the Renegade III: a 1974 Jeep CJ-5 that we’ve taken to the ground and reconstructed with all of the enhancements we would love to have seen back in in the seventies.

The build was conceived, designed, and managed by AAM Program Sales Manager Greg Griffith, with help from Atomic City 4×4 in Oak Ridge, Tennessee, and Man Cave Designs. It was made possible thanks to the support of our many valued Total Truck Centers™ vendor partners.

In this video, we take a look at the following products from Flex-A-Lite:

Parts used in this video:

Flex-a-Fit® Aluminum Radiator and Electric Fan Combo (51169)

Mojave Heater (640)

Mojave Plenum (650)

 

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Renegade III: Bestop Supertop Classic & Trailmax II Classic Low-Back Seat

For the third consecutive year, The AAM Group™ and Total Truck Centers™ are sending a custom build to SEMA. This year is the Renegade III: a 1974 Jeep CJ-5 that we’ve taken to the ground and reconstructed with all of the enhancements we would love to have seen back in in the seventies.

The build was conceived, designed, and managed by AAM Program Sales Manager Greg Griffith, with help from Atomic City 4×4 in Oak Ridge, Tennessee, and Man Cave Designs. It was made possible thanks to the support of our many valued Total Truck Centers™ vendor partners.

In this video, we take a look at the following products from Bestop:

Parts used in this video:

Supertop Classic (51595-01)

Front Seats (39429-01)

Want to know more about Bestop? Click here:
https://totaltruckcenters.com/manufacturer/bestop

 

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Renegade III: Scorpion Protective Coatings X02 2 Gallon Liner Kit

For the third consecutive year, The AAM Group™ and Total Truck Centers™ are sending a custom build to SEMA. This year is the Renegade III: a 1974 Jeep CJ-5 that we’ve taken to the ground and reconstructed with all of the enhancements we would love to have seen back in in the seventies.

The build was conceived, designed, and managed by AAM Program Sales Manager Greg Griffith, with help from Atomic City 4×4 in Oak Ridge, Tennessee, and Man Cave Designs. It was made possible thanks to the support of our many valued Total Truck Centers™ vendor partners.

In this video, we welcome Dana Mitchell from Scorpion Protective Coatings and install their X02 System.

Parts used in this video:

Scorpion Protective Coatings X02 2 Gallon Truck Bed Liner Kit

Want to know more about Scorpion Coatings? Click here:
https://totaltruckcenters.com/manufacturer/scorpion-protective-coatings

 

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.