Tag: k&n

K&N: Get a Free Mini Decorative Replica Helmet or $25 Card with Air Intake System Purchase

John Arnaud Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good December 1–31. Click image for printable form and complete details!

 

K&N Free Mini Helmet or $25 Card on Air Intakes

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N: $25 Back on Any Intake System

John Arnaud Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid July 1 to July 31, 2017. Click image for printable form and complete details!

 

KN 25 Dollars Back on Intake System

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N: $10 Back on Any Cabin Filter

John Arnaud Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid July 1 to July 31, 2017. Click image for printable form and complete details!

 

KN 10 Back on Cabin Filter

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N Orion Universal Air Intake System 54-5000

K&N (54-5000): Orion Universal Air Intake System

John Arnaud Leave a comment
Use This Post Clip for Email

The universal Orion air intake system from K&N is engineered to increase volumetric efficiency and engine horsepower. The Orion uses K&N’s famous removable cotton gauze air filter and offers the benefits of an open-cone filter and standard air box in one unit. In addition, the plastic injection-molded housing acts as a heat shield to prevent power loss. Assembly designs were flow tested for many hours to achieve Orion’s final shape.

K&N 54-5000 includes a template to cut your own vinyl wrap to customize the housing, a 76mm air filter base flange, and a 100mm housing intake. The filter base has a 1/4” NPT threaded fitting to accommodate an optional vent adapter.

Available separately: mounting hardware, vent adapters, and cold air hose.

Features

  • High filtered air flow increases HP and acceleration.
  • Injection-molded filter housing.
  • Washable and reusable lifetime air filter with molded velocity stack.
  • Flow-tested assembly for optimized air flow and reduced pressure loss.
  • Warranty: Million Mile Limited

K&N Orion Universal Air Intake System 54-5000

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

Freedom Ford: K&N Blackhawk Induction Air Intake System

John Arnaud Leave a comment
Use This Post Clip for Email

“Freedom Ford” is The AAM Group’s 2016 project vehicle, a Ford F-150 wrapped in a black digital camo blended with a custom American flag graphic. Boasting 35” tires and a 7” lift, the Freedom Ford is an imposing presence and a patriotic tribute to the hard-earned liberty we enjoy in the United States thanks to the vigilance and sacrifices of our most courageous citizens.

Freedom Ford is being outfitted by many of the biggest names in the truck aftermarket. See it live in booth #SU02 at this year’s SEMA Show.

Products featured in this video:

Blackhawk Induction Air Intake System (71-2591)

Want to learn more about K&N? Click here:
http://totaltruckcenters.com/manufacturer/k-n

Follow the Freedom Ford’s journey on the Total Truck Centers™ Facebook page: https://www.facebook.com/TotalTruckCenters/

 

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (63-1573): Snorkel Air Intake System for ’12-’16 Wrangler JK

John Arnaud Leave a comment
Use This Post Clip for Email

The 63-1573 AirCharger air intake system from K&N replaces the restrictive factory air filter and air intake housing on 2012–2016 Jeep Wranglers (3.6L V6), dramatically increasing usable power and acceleration throughout the engine’s RPM range.

This kit includes a uniquely designed snorkel system that brings in outside air from the top of the windshield, allowing you to tackle extreme off-road conditions. Fresh air is directed through the low-restriction snorkel tubing and into a replacement K&N roto-molded polyethylene air box that contains a chrome-topped K&N high-flow air filter. The aerodynamic tube smooths and straightens the air flow before it goes directly into the engine’s throttle body for a guaranteed power gain.

K&N (63-1573): Snorkel Air Intake System for ’12-’16 Wrangler JK
K&N (63-1573): Snorkel Air Intake System for ’12-’16 Wrangler JK

The oversized, cone-shaped air filter can be used for up to 100,000 miles before servicing is needed (depending on driving conditions). The intake installs in 90 minutes or less using your vehicle’s existing factory mounting points.

Note: Not legal for use or sale in California. Right front fender will need to be removed to install the snorkel (kit can be used without the snorkel); no cutting required.

Features

  • Designed for 2012+ Jeep Wranglers.
  • Dyno-estimated horsepower gain: 6.58 @5,200 rpm (results will vary).
  • Dyno-estimated torque gain: 9.38 ft.-lb. (results will vary).
  • Rotational molded air box, inlet tube, and snorkel system.
  • Kit can be used without the snorkel.
  • Enclosed air box separates fresh air from hot engine compartment.
  • Removable air box lid provides easy service access to washable/reusable air filter.
  • Included heat shield protects snorkel system.
  • Backed by K&N’s 10-year/Million Mile Limited Warranty.

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-9036): CARB-Friendly Air Intake System for 2014-2015 Toyota Tundra 4.6L and 5.7L

John Arnaud Leave a comment
Use This Post Clip for Email

The K&N 57-9036 performance air intake system is a little different from the average K&N cold air intake system. K&N engineers chose to retain the use of the 2014-2015 Toyota Tundra 4.6L or 5.7L V8 stock air filter box when designing this system. This decision increases performance while leaving all the stock emissions control equipment in place, allowing the 57-9036 to achieve an exemption order (EO) from the California Air Resources Board (CARB) for the 2014-2015 Toyota Tundra models listed below.

2015 TOYOTA TUNDRA 5.7L V8 F/I – All CARB EO Number: D-269-52
2015 TOYOTA TUNDRA 4.6L V8 F/I – All CARB EO Number: D-269-52
2014 TOYOTA TUNDRA 5.7L V8 F/I – All CARB EO Number: D-269-52
2014 TOYOTA TUNDRA 4.6L V8 F/I – All CARB EO Number: D-269-52

K&N 57-9036
K&N 57-9036

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-3077): 2011-2014 Chevrolet and GMC Duramax

John Arnaud 1 Comment
Use This Post Clip for Email

The K&N 57-3077 FIPK air intake system replaces the restrictive factory air filter and air intake housing in specific Chevrolet Silverado 2500/3500 HD and GMC Sierra 2500/3500 HD models with a turbo V8. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air with less effort than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a black rubber-topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s turbo inlet for a guaranteed power gain. The tube accommodates the factory mass air sensor and air filter minder. The oversized cone-shaped air filter can be used for up to 100,000 miles before servicing is needed, depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, a ratchet set, and an Allen wrench.

K&N 57-3077
K&N 57-3077

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (57-2583): FIPK for 2011-2014 Ford F-150 3.5L EcoBoost

John Arnaud Leave a comment
Use This Post Clip for Email

K&N’s 57-2583 50-state, street-legal air intake system for 2011-2014 Ford F-150 3.5L EcoBoost pickups provides guaranteed increases in horsepower and torque. It features a roto-molded, high-density polyethylene (HDPE) air intake tube attached to a large, reusable, high-flow K&N air filter and an application-specific heat shield to deflect engine heat away from the air inlet. The HDPE air intake tube allows for increased flexibility in design and manufacturing as well as the large power gains.

K&N 57-2583
K&N 57-2583

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

K&N (63-3088): AirCharger Intake System for 2015 Chevy Colorado 3.6L

John Arnaud Leave a comment
Use This Post Clip for Email

General Motors’ 305-horsepower, 3.6-liter LFX V6 engine is found in several Buick, Cadillac, and Chevrolet models—including the Chevy Camaro. When equipped with this engine, the 2015 Chevy Colorado and GMC Canyon are the most powerful mid-size pickups currently available in North America. Even though they beat the competition by more than 40 horsepower, there’s never any harm in improving performance—especially when it’s as easy and rewarding as bolting on a K&N performance intake system.

K&N’s 63-3088 air-intake system frees up large amounts of power by replacing the restrictive factory system with a free-flowing, roto-molded, black HDPE air intake tube; a high-flow, chrome-top conical air filter; and an application-specific heat shield to protect air entering the filter from engine heat.

Whether your 2015 Colorado or Canyon 3.6L V6 is used as a reliable daily driver, a dedicated workhorse, or something in between, this air-intake system will provide increased performance with better engine sound for years to come.

Not legal for sale or use on any pollution-controlled vehicle in the state of California.

K&N_63-3088
K&N_63-3088

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.