Tag: AirAid

AIRAID: Cold Air Intake for ’17-’18 Sierra/Silverado HD Duramax 6.6L

John Arnaud Leave a comment
Use This Post Clip for Email

AIRAID’s cold air intake for 2017–2018 HD Chevy Silverado and GMC Sierra with the new LML Duramax 6.6L diesel engine gives you the extra performance you need to dominate your day by eliminating the horsepower and torque inhibitors inherent to the OE design.

The 201-335 (with SynthaFlow filter) and 200-335 (with SynthaMax filter) cold air intakes replace restrictive factory components to take better advantage of the Duramax’s high-flow heads and ram air-intake ducts. A special high-flow air box mounts in place of the stock air box and filter, while the air filter simultaneously pulls in more air than standard paper filters and avoids restriction by storing dirt inside instead of on top. Finally, the smooth, roto-molded intake tube greatly reduces turbulence as air flows through, while absorbing heat to produce cooler air flowing to your engine.

These AIRAID cold air intakes produce estimated performance boosts of 11.92 horsepower and 34.17 ft.-lb. of torque (individual results will vary) along with better engine protection, faster throttle response, and a throatier engine intake sound.

Features

  • For 2017–2018 GMC Sierra HD and Chevy Silverado HD with Duramax 6.6L diesel engine.
  • Provides better engine protection, faster throttle response, and a throatier engine intake sound.
  • Replaces stock intake tube, air filter, and air box.
  • +11.92 HP and 34.17 ft.-lb. torque.
  • Cools and smooths air entering the engine.
  • Better filtration and cleanable filter media.
  • SynthaMax or SynthaFlow filter options.
  • Cross-linked, high-density polyethylene material.
  • Provisions for factory mass air sensor.
  • Easy to install with common tools.
  • Warranty: no-hassle lifetime.

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (200-639): Throttle Body Spacer for 2015–2017 GM Trucks and SUVs

John Arnaud Leave a comment
Use This Post Clip for Email

Proven in repeated testing to improve midrange power in a variety of GM trucks and SUVs (Escalade, Silverado, Sierra, and Yukon), the 200-639 throttle body spacer from AIRAID lengthens your system’s plenum to give your cylinders a greater volume of air to draw from. These throttle body spacers will increase off-idle torque from 800 to about 3,000 RPM thanks to their patented helix bore design that results in higher airflow and faster filling of each individual cylinder.

Each 200-639 spacer is constructed from aircraft-grade 6061-T6 aluminum, and every kit includes all instructions and required gaskets, hardware, and brackets to maintain geometry with factory components.

Features

  • For GM vehicles.
  • Made from aircraft-quality billet 6061-T6 aluminum.
  • Improves low-end torque and throttle response.
  • Provides stronger mid-range power.
  • No drilling or cutting required.
  • Includes gaskets, hardware, and precision brackets.
  • Installation: < 1 hour.

AIRAID Throttle Body Spacers for GM Trucks and SUVs 200-639

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (510-340): MXP Cold Air Intake for Toyota Tundra and Sequoia

John Arnaud Leave a comment
Use This Post Clip for Email

Like all gas-powered engines, your Toyota V8 makes power by burning a mixture of gasoline and oxygen. Oxygen acts as a catalyst for the detonation, so the number of oxygen molecules in the air charge will directly affect performance. Unfortunately, the OE Toyota Tundra and Sequoia intake systems share many of the same inefficiencies. For example, the intake tube has a tapered shape, with irregular, corrugated inner surfaces. And the air box lets in only a small amount of air, then forces it through a thick paper air filter. All of this causes the air to become turbulent, elevating the temperature and lowering the oxygen content.

AIRAID’s 510-340 MXP high-performance intake system is designed to increase cooler engine airflow, so it can make more horsepower and torque without engine modification. The end result of introducing a higher volume of colder air? An estimated increase of 9 HP and 10 ft.-lb. of torque.

Features

  • For some models of Toyota Tundra and Sequoia.
  • Increases horsepower and torque by 9 HP and 10 ft.-lb., respectively.
  • Replaces stock air box, air filter, and intake tubing.
  • Rotational-molded air box keeps intake air isolated from engine heat.
  • Easy to install using common hand tools.
  • Premium high-airflow air filter.
  • Washable and reusable filter media.
  • Warranty: No-Hassle Lifetime.

AIRAID MXP Cold Air Intake for Tundra and Sequoia 510-340

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID: $25 Back on Any Intake System

John Arnaud Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Offer valid July 1 to July 31, 2017. Click image for printable form and complete details!

 

AIRAID Summer Sale 25 Dollars Back on Any Intake

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (302-236): MXP Air Intake System for Ram 1500/2500/3500

John Arnaud Leave a comment
Use This Post Clip for Email

The ultimate AIRAID cold air induction system, the MXP delivers higher levels of horsepower and acceleration gains for specific Ram 1500, 2500, and 3500 pickups—starting with a one-piece, roto-molded air box that addresses all the shortcomings of the restrictive factory box.

Inside the 302-236 is a premium AIRAID air filter, which then directs the air flow through a cross-linked, high-density polyethylene intake tube precision designed using extensive computer modeling. Fresh air ducting further promotes flow along with provisions for the factory crankcase vent tube.

Plus, the MXP is easy to install, with no complicated recalibration required: just bolt it on and go! Be sure to check your specific vehicle application to determine legal status for use where you live.

Features

  • Black dry-synthetic premium air filter.
  • Superior horsepower and acceleration gains.
  • Replaces stock intake tubing, air filter, and air box.
  • Filter is protected from hot engine bay air.
  • Easy to install using commonly available tools.
  • High-airflow washable and reusable air filter media.
  • Warranty: AIRAID No Hassle Lifetime.

AIRAID MXP 302-236

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

AIRAID (510-309): MXP Air Intake System for ’16-’17 Toyota Tacoma

John Arnaud Leave a comment
Use This Post Clip for Email

The 510-309 MXP air intake kit from AIRAID for 2016–2017 Toyota Tacoma offers an 8 HP boost at 4,900 rpm (results may vary) and includes a washable and reusable tapered conical universal AIRAID air filter; a one-piece, roto-molded air box; high-density polyethylene tube; integrated velocity stack; and four stainless steel clamps.

The filter itself leverages a multilayer cotton gauze and non-woven synthetic media design for superior filtration. The media is reinforced by both an inner and outer layer of wire mesh to prevent deformity or collapse under high airflow.

The tube benefits from advanced computer modeling to maintain proper mass airflow readings and calibration, while the velocity stack promotes airflow. In fact, AIRAID designed 510-309 specifically to address restrictive factory air flow realities.

Features

  • For 2016–2017 Toyota Tacoma.
  • Replaces stock intake tubing, air filter, and air box.
  • Results in horsepower and acceleration gains.
  • High–air flow washable/reusable air filter media.
  • Aluminum lid shields the filter from hot engine bay.
  • Tuned velocity stacks enhance air flow and mass air sensor functionality.
  • No-Hassle Lifetime Warranty.

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

In the Garage™ with Total Truck Centers™: AIRAID MXP Cold Air Intake System

John Arnaud Leave a comment
Use This Post Clip for Email

Come inside the Total Truck Centers™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we take a closer look at the MXP Air Intake System from AIRAID and install it on a 2015 Ford F-150 Parts used in this video:

AIRAID MXP Cold Air Intake System (401-338)

Want to check out more about AIRAID?
http://totaltruckcenters.com/manufacturer/airaid

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NSF1 Project Jeep Part 11: AIRAID Cold Air Intake

NSF1 Project Jeep Part 11: AIRAID Cold Air Intake

John Arnaud Leave a comment
Use This Post Clip for Email

NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.

In this video, we take a closer look at the following from AIRAID:

MXP Air Intake (310-132)

Follow the NSF1 project on:

Facebook: https://www.facebook.com/NSF1Jeep/
Twitter: https://twitter.com/performancejeep #NSF1

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

NSF1: An Overview and Complete Walkthrough

John Arnaud Leave a comment
Use This Post Clip for Email

NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. In these videos, AAM Group President Tim Odom and NSF1 Project Manager Greg Griffith share the story behind this awesome project Jeep and take you on a tour of the different products they installed.

Follow the NSF1 project on:

Facebook: Facebook.com/NSF1Jeep
Twitter: Twitter.com/PerformanceJeep #NSF1

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.

The AAM Group presents: NSF1 Project Jeep

John Arnaud Leave a comment
Use This Post Clip for Email

NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. In this video, AAM Group President Tim Odom and NSF1 Project Manager Greg Griffith share the story behind this awesome project Jeep.

Follow the NSF1 project on:

Facebook: Facebook.com/NSF1Jeep
Twitter: Twitter.com/PerformanceJeep #NSF1

Ready to buy? Need help with the install? To find your nearest Total Truck Centers affiliate, see our Store Locator. Or join the conversation at the Total Truck Centers Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of manufacturers with whom it has a business relationship.